What is pH and why should it concern us?

Sadly, mainstream medicine does not recognize the importance of monitoring pH. I wish I had known about it when I was raising children, as it would have provided an effective tool for observation. One which would have revealed when the kids were vulnerable to opportunistic infection. Though I was careful to manage their sugar intake and provided well balanced meals with no processed foods, I would have welcomed the information which to this day lies largely unacknowledged, or skewed by promoters of high-priced alkalizing products.

This by no means represents a full discussion of the subject, but should serve to enlighten those who know little to nothing, and may serve as impetus for further research.

Simply put, pH is a measurement of potential hydrogen. Often known as the acid-alkaline balance of a substance, including one’s urine, saliva, and/or blood plasma. Usually measured on a scale of 5.0 to 9.0 (The scale actually goes to 14.), the higher numbers represent a more alkaline reading, the lower numbers more acidic.

Many folks get in the habit of checking urine pH, but the more relevant (and more practical) measure is the saliva pH. Consider that the urine test shows the pH of the fluids leaving the body, whereas the saliva test reveals the pH of the fluids actually washing your cells, known as the interstitial pH. (Perhaps the most accurate test of all is the blood plasma pH, but this is available only through costly testing. For our purposes, interstitial pH provides sufficient information.)

What should I look for?

Remember, the low numbers represent acidity, the higher numbers are alkaline. The classic rhetoric is that we should average around 7.0 to 7.2 which corresponds to the neutral zone. That said, many would have you believe that you should always be in that zone. Not so.

When you sample your pH, whether urine or saliva, it provides a snapshot of that given moment. The only way to get a real moving picture of what is occurring is to take multiple samples throughout a given day. This will allow you to calculate the average pH for that day, and it will also reveal the degree of change occurring during that period. Both factors are important.

Though it is desirable to average around 7.0 to 7.2 on the pH scale, it is equally important that you move from acid to alkaline and back, moving through the neutral zone at least once a day.

When your pH crosses that threshold of 7.0 the immune system is able to recognize when it needs to go to work. If you are locked in to a high pH you may be feeling great, but it’s possible that you have undetected issues which the immune system is failing to address. In other words, the static alkaline condition may be masking symptoms and/or conditions.

On the other hand, if you are chronically low on the pH scale, you may experience the symptoms of your condition more intensely. Pain and fatigue, for instance, are exacerbated by a chronically low pH. For this reason, it is demonstrable that raising pH from a chronic acidic condition to a reasonably alkaline state relieves symptoms. This phenomenon has helped to sell many water machines; but in our view, it has led people astray in that they come to rely on the machines and their alkaline water to maintain their alkalinity artificially.

Aren’t alkaline water machines a reasonable answer?

It’s far more desirable to have the body maintain a healthy flow and a good balance on its own. For this reason, we recommend that these units (and other products which claim to alkalize) be used only in the short term.

Note that you could be highly toxic and still show a pH of 7.2. This measure of pH does not show us, for instance, if part of an organ is acidic. If we continue to add alkaline salts, one or more organs could become toxic. That is, the interstitial fluid may become so hard that it can’t flush toxins out any more.

Alkalized water contains alkaline salts, and your body’s water becomes too hard with the constant addition of salts, whether alkaline or acidic. (Your data from your pH measurements will also be more accurate if you stop adding alkaline salts.)

It’s important that we recognize that both alkaline and acidic salts can be toxic. If you were to put a mouse in a bucket of water, for instance, he will swim for his life. Add ¼ cup laundry soap which is highly alkaline, and the mouse will soon drown.

How can I manage pH naturally?

When you have the kind of information you need, you can prompt the body to alkalize naturally.

Pure water with lemon or lime helps to optimize your pH.

Pure water is your first important ally. We recommend water that has been filtered through a reverse osmosis unit. You will notice that when testing this water with litmus paper it will appear as though the fluid is acidic. It’s not really acidic. It is simply not reacting

Left to its own devices, the body will pretty much take care of maintaining proper pH balance; but we have outside interference from inflammation, infection, medications, and other stress-inducing injuries. It’s generally fine to utilize the above-mentioned tools as crisis intervention. The key is to not become reliant on them.

In addition to being watchful of our diet, we prefer simple home remedies such as the juice of a fresh lemon or other citrus in drinking water. This will often give the body a boost. A more dramatic impact will be noticed with bicarbonate of soda, taken with water and/or in a soaking bath. We suggest this measure if the citrus does not make the difference.

If your pH is chronically low, you are severely toxic. This is a condition referred to as acidosis. Generally, this is accompanied by feelings of low energy, even chronic disease.   It is important to take action if, after numerous saliva samples, you observe your numbers not fluctuating.

The traditional method to allow the body to alkalize in a natural way is to employ a starvation diet. While we don’t recommend this, as most people we talk to are already dealing with significant health issues, the inherent wisdom of this approach can be understood if we look a little more deeply.

As mentioned, toxicity can occur with an over abundance of salts, whether alkaline or acidic. Therefore, adding more salts (of any kind) is not the answer. Rather, the objective should be to cleanse the body rather than add salts. This is especially important for those fighting chronic disease.

Fresh foods will help to optimize your pH!

Fasting, in whatever fashion works for you, can produce a positive impact on our health. Whether ill or the picture of health. Whether dealing with a chronic disease or or just wanting to do a routine cleanse for maintenance. Obviously, the nature of the fast and the duration must be adjusted to suit the situation; we simply suggest that you consider this possibility, with an eye for maintaining proper hydration and electrolyte status.

Some prefer to supplement with minerals and we generally recommend this, as we are largely mineral deficient due to the poor quality of the soil in which are food is grown. In fact, mineral supplementation may increase the effectiveness of your Rife sessions, as it makes your tissues more conductive. This is somewhat of a study in itself. You can learn to restore health and diminish symptoms by learning what minerals deficiencies leave us vulnerable to certain conditions.

That said, we emphasize the importance of not becoming too reliant on supplementing with anything that increases the levels of alkaline salts in your body.

Most people don’t realize that interstitial pH (as measured via saliva) does not reveal whether a part of an organ is acidic. If we continue to add alkaline salts, one or more organs could become toxic.

pH of the water must be properly balanced for fish to thrive.

That is, the fluid could become so hard that it can’t flush toxins out any more. This is why we must change the water periodically in a fish tank. We can add alkalizing salts up to a point; but beyond that level, the environment is too saturated and will not support life. The only way to protect against this is to change out the water.

Thus the recommendation for occasional fasting for us humans. With plenty of pure water. For those who are intimidated by the notion of fasting, keep in mind that abstinence from food need not be an extended period of time. In fact, we do this naturally by being off food during the night and breaking our fast in the morning. It’s a natural cycle. All the more helpful that we flush out toxins in the morning with high quality water and/or herbal tea.

For some, one to three days is optimum for an occasional fast. Others prefer ten day fasts or longer. Many like to time this cleansing with the seasonal changes. The point is to find the rhythm that works for you. Be cautioned to not go to extremes. This holds true for many of the therapies you might be pursuing. More is not always better.

If I am generally alkaline, does that mean I am not toxic?

Not necessarily.

This is  common misunderstanding, and it has led many people astray. You could be highly toxic and still show 7.2 pH on your sample. Your pH test only shows the balance of salts; that is, are there more salts in the system that are acid or alkaline. It does not show the total salts.

As noted in the fish tank scenario, the alkaline salts became so dense that the water became deadly to the fish. True, the salts were alkaline; and we have learned that this is desirable. Yet this is a classic case of too much of a good thing.

Points to remember:

It is NOT desirable to be always acidic. If you are chronically acidic, your immune system thinks you are always sick all of the time. In fact, you might be. We think this could be a factor in what are known as auto-immune disorders and numerous other conditions.

When your pH goes across the neutral point (7.0), the immune system gets a cue from the more acidic parts of the body. This is important. It means that it is NOT desirable to be always alkaline. Likewise, a chronically high pH could be masking issues that would otherwise be more apparent.

You will only know your true average pH if you take samples numerous times in the course of the day. Preferably two or three days. This will reveal a certain pattern: your highs and your lows. The flux is desirable!

Note that diet is not the only influence on pH. Stress can also be a factor. I have noticed that if I don’t get a good night’s sleep, my morning pH is lower than usual.

When dealing with elevated stress, remember to take measures to boost your pH. You are likely to get through the episode more handily.

Many people find that their symptoms, including pain, are ameliorated when they get their pH up. This phenomenon has helped to sell lots of water machines.

It’s desirable to have a breadth of pH in a given day. Do not strive to be alkaline all the time. It’s the fluctuation and the average that are important.

Don’t judge “good pH” or “bad pH”. It’s information. Take it in, and keep learning about the subject so you can make viable assessments about what the data might be revealing to you.

Using the Rife machine will likely make an impact on your pH, short-term and long-term. The short-term pH change (measured before and after each session on the machine) provides information which helps us to make reasonably sound judgments about what is occurring in the body, particularly with respect to microbial die-off and detoxification. We use this data to guide us with respect to when it’s appropriate to increase the duration of your sessions and/or to progress to another range of frequencies.

Furthermore, we have observed that a chronically low pH will often glide upward over time, providing the Model A user with a more reliable ebb and flow as well as a higher average.

There is much more we can discuss in further segments. Consider this a thoughtful introduction to the discourse of alkalinity vs acidity. We strive to give you some distinctions which will help you to be better observers of this phenomenon; and we hope this discussion will give you a sense of confidence going forward.

If you have found the information confusing, or you have a different view, please comment on our blog. There is a reply box below the article, and we also welcome you to our new forum at www.staytuned.ws  We anticipate a lively discussion!

Here, John Wright explores the basic effects of his state-of-the-art Rife machine, the Model A. In development for 18 years, Model A was perfected in 2004.  Our device delivers most potent frequencies in a compact and user-friendly format.

John addresses the following:

• The uptake of electrons is converted to ATP, the result being an improvement in energy which many people feel right away.
• Immunity is increased by the stimulus effect on the tissues of the body, including the blood.
• Detoxification occurs as a result of the stimulus to the organs, making them function better.
• Pathogens are destroyed by the application of current in the safe range of frequencies we employ.
• As a research and manufacturing operation, JWLABS cannot practice medicine, provide medical advice, or give therapy of any kind. Our job is to help people use their machine as a home remedy in a way that’s safe and most likely to be effective. 

We’ve had a number of responses to John’s recently re-posted video discussion of the basic effects of Model A. Here, we address a series of questions presented by one of our readers.  It provides just a brief review of observations we’ve made over the years; and though it’s not a comprehensive list, we hope it will prove helpful to even our most seasoned Model A users.

We offer this, not as prediction or promise, but as points of information which may help prepare you for what follows your initial Model A sessions. Perhaps these points will clarify what you have already observed; in which case, you may find certain reassurance that things are progressing normally.

•  Fungus – Increasingly, we’ve taken note of the part that fungus plays in many conditions. It’s becoming fairly common knowledge that systemic fungus (often, but not exclusively, candida albicans) is a significant player in Diabetes, Cancer, and Lyme disease. We suspect that it plays an integral role in countless other conditions, as well.
  

           Regular users of Model A understand that each of our frequency sessions provides masterful tuning  through the entire range of fungal frequencies. It’s important to note that in the presence of fungus, use of the Model A Rife machine may temporarily increase symptoms and/or sensitivity in the subject. For this reason, a conservative approach and careful observation are encouraged.

•  Blockage – With respect to blockages, whether intestinal or cardiovascular, Model A users should anticipate a possible sudden change in symptoms, good or bad. Sometimes this will require conventional medical intervention, as in the case of a fistula, for instance.
  

•  Infection – With the introduction of frequency sessions, it’s not unusual for undiagnosed conditions to be revealed. This is especially true if the condition exists at any significant level in the body. Given that this may result in a manifestation of new symptoms, it is imperative that beginners proceed conservatively with their sessions, allowing the body to clear the effects of detoxification and recovery.

•  Injury – For persons suffering from injury, whether by accident or surgical procedure, it is reasonable to expect a more rapid rate of healing. This signifies an accelerated growth of new cells, as well as increased circulation to the area.

•  Drainage/Detox – It’s reasonable to expect Model A users to have an increase in the amount of detoxification and/or the need to detoxify. This applies to the local area of concern, as well as the entire body systemically. It is a fact that the current, as well as the frequencies, improve the pumping action of the cells so they more readily release toxins.      

Often, the degree of detoxification is observable through saliva pH testing. These indicators are often more apparent when first beginning with Model A or when moving to another range of frequencies. Note that we encourage drinking plenty of water to assist this natural process.

• Further Diagnosis – Any new symptoms that appear as a result of using the Model A may provide an opportunity for conventional diagnosis of problems which were previously undetected. The machine itself is not a diagnostic tool, yet its use has often led to a better understanding of what is truly the cause of certain conditions.

Model A represents a step outside the box with respect to managing our health and well-being.

We thought our readers would take special interest in these two stories reported recently. Both are from Model A customers who have been dealing with Lyme disease for an extended period of time.

The first is from a gentleman who was having curious reactions to his Model A sessions. He had long been plagued with anxiety and other health issues which he attributed largely to his history with Lyme disease.

Before I had gotten the rife machine, I’d been under the care of a naturopath/kinesiologist for panic attacks with a diagnosis of adrenal weakness. I thought it would be a good idea to get a JW Labs rife machine to re- build the adrenals. Upon first usage of the [Model A] rife machine I got a ‘passing out’ feeling…so I just backed off a bit.

Eventually I was able to build up to go longer with no episodes…but then…I suppose I went to strong/far and the episodes increased and the panic attacks became MUCH worse than ever before. I also got a strange numbness/tingling in my left arm which would come and go…also ear ringing. I had to stop the gym/treadmill because that would exacerbate the ‘passing out’ feeling.

VERY long story short, my kinesiologist found that the panic was caused by pesticides which, given our toxic society,  could have come from exposure to malathion on the Jersey shore to flea bombs to my well water. He gave me a supplement called ‘Detoxosode’ and Parotid pmg and the horrible 5 day attacks just stopped…like that.

Let me say emphatically that the rife machine actually began the healing process by rooting out the toxin… and frequently microbes hide behind the toxins…

Moderation is the keynote here…the JW Labs device is VERY powerful tool and a very very little for a long time is what wins the day. I torqued it way up which initiated the toxin excretion from my brain but the better way would have been a long and steady moderation.

In recovery, i’m back in the gym running but I can at times smell the toxin…I’ve had weird running sores on my feet and I still have occasionally tingling numbness of my arm…but the panic is gone… Hope this help some of you out there!!         Peter K.,  New York

Peter shared that as a young boy, he and his playmates ran along behind the trucks spraying Malathion. They got soaked, while the drivers of the trucks were wearing protective masks. People were so unaware, he said, that they used to gather on their front porches to watch the spectacle. How many of us were inadvertently exposed to multiple poisons? They have accumulated in our cells, wreaking havoc with our nervous systems, and more. The good news is that the Model A will help to reveal these invaders; and though we may become more symptomatic at first, the machine plays an important role in uncovering and removing them.

 ~~~~~~~

Next, we hear from a woman with Lyme disease who reported having so much pain in her joints that sometimes she could not walk. Now, after just over two months using her Model A, her condition has improved so much that she can wear her favorite high heeled shoes!

I had such pain in my ankles that I was not able to put my foot in the ” toe down, heel up” position that high heels require. I was in flats for about 6 months and really unhappy about it.  I would occasionally find a day I could wear a small heel, but that was rare.

After using the Model A for about 3-4 weeks, I noticed I was able to wear some of my lower heels. Now….I wear whatever I want and wear them all day long. I have on a pair right now that are about 3.5 inches but have them up to 5″.      Joyce D., Massachusetts

Please share your success stories with us in the comments section below or by e-mail at info@rifemachine.com

The following story is about my wife.

About two years ago when my wife was 58 she went to see her gynecologist. The results were not good. Gynecologists have four categories for tissue. Category 1 is normal and as the number goes up they get worse with category 4 being cancerous. The test results for my wife was a category 3.

This meant that she had pre-cancerous cells of the cervix, not a full-blown cancer.

The doctor wanted my wife to have a hysterectomy. I asked the doctor if we could have a few minutes alone to make a decision about the hysterectomy. While alone, I told my wife that I thought the Model A Rife Machine that I used might help resolve her medical problem without surgery. The doctor did a good job of scaring my wife, and she pointed to the doctor’s medical diploma from Harvard on the wall and said “this doctor is a well qualified medical professional and you’re not”. I suggested she use the Rife Machine for two months and if her test results don’t get better she can then have the hysterectomy. My wife reluctantly agreed and I ended up feeling like I was threatening my wife’s life by not going ahead with the doctor’s recommendation for the hysterectomy.

When the doctor returned I told her we wanted to wait two months to see if the condition gets better before making a decision about doing a hysterectomy. I didn’t tell her that my wife was going to use the Rife Machine. The doctor apparently was not used to patients not following her medical advice and directed the following comment to me. The doctor said that if I was right and my wife’s condition could get better without surgery it meant that her medical education had been wrong and for 20 years she has been practicing medicine wrong.

My wife told the doctor that she wanted to have a D and C procedure not a hysterectomy and be retested in two months to see if she still needed the hysterectomy. The doctor said that time was critical and that the test results in two months would be the same, or may get worse. The doctor said that this was a life threatening condition, and she urged my wife several times not to wait and to get the hysterectomy because in two months it may be too late. You can imagine how bad I felt for asking my wife not to have the hysterectomy that the doctor said could save her life.

I have had the Model A Rife Machine for several years and during that time my wife had refused to use it. She now used the Rife Machine twice a week for one hour each time with the electrodes on her feet. She was retested by the doctor two months later and the result came back as category 1 which is normal tissue. The doctor didn’t ask what my wife did to improve her test results. The doctor seemed embarrassed and just tried to get us out of her office as quickly as possible. Over the next two years my wife used the Rife Machine about once a month and was tested several times and the results have all been normal.

I hope that readers benefit from my wife’s experience on how gynecologists try to direct their patients toward radical surgeries like hysterectomies when my wife’s cervical tissue tested only pre-cancerous and not cancerous. The people at JWLABS were very helpful and the results that my wife got with the Model A Rife Machine seemed like a miracle.

John H., Virginia 10/31/12

When we examine the frequency spectrum in nature, we observe that almost all frequencies generated in the earth are in the audio range, meaning the part that you can hear. Although there is a minimal amount of background radiation noise, the percentage of exposure it represents is very very small, indeed. In short, frequencies in the audio range are the safest.

It is established that above the audio range, the higher the frequency, the more dangerous it becomes. The frequency energy itself is trying to turn into heat, into light, and into electricity. Frequency energy in the microwave range, and most of the radio range, are all deadly in high concentrations. This is particularly true in prolonged or repeated exposure in very small amounts.

This factor must be carefully considered when examining the genre of Rife machines in the marketplace which tout radio frequencies. Often, promoters of these devices fall back on the axiom that their “broadcast” machines are the only true Rife machines.

For years, we have consistently reported that the broadcast-type device was useful primarily to prove Dr. Rife’s theory. It was what he needed to deliver frequencies to his Universal microscope.  (Read more HERE.)

True, experimenters continued to employ the “ray tube” or “beam ray” devices, irrespective of concerns expressed by some scientists of the era concerning the consequences of over-exposure to radio frequencies. Needless to say, less was known at the time of the real dangers. Indeed, microwave was unheard of.

Today we know the dangers of microwave exposure. So why are manufacturers of these broadcast-type devices not disclosing that their radio frequencies include the microwave band? Do they not know that microwave energy damages, and even kills human cells? And that the brain is particularly susceptible?

Cell phone towers alter our landscape – and the frequencies of our bodies.

In today’s modern world we are surrounded by devices producing massive frequency energy, almost all of which are in the unhealthful ranges.

In the world of Rife machines the broadcast, or radiant tube, is merely a means of application. If you are building your own device, it is by no means a required modality because 80% of the most established Rife applications cannot be performed by a tube apparatus anyway.

Radio energy is not healthful energy. Period. Experts can appreciate that if it is oscillated correctly, and there are proper measuring procedures it does have some value for a small number of applications. In fact, even ionizing radiation, such as X-rays, can be oscillated at the correct frequency thus achieving a percentage of the effect we call Rife therapy. But that would be like putting frosting on rat poison.

You can see the problem with the logic. Why build a device which is marginally effective in most applications and introduces additional health concerns?

Simply put, only direct application is direct. All other means of application are indirect. These other techniques are only capable of a small portion of what is possible when using current applied directly to the body. It should be obvious that only direct current is capable of microbial electrocution, which is an essential part of the therapy for most afflictions.

In spite of what some Rife promoters would like you to believe the ray-tube, beam-ray, and resonant gas filled applicators have absolutely no useful therapeutic value in the majority of applications where Rife therapy has demonstrated to be highly effective in a great number of cases worldwide. 

Broadcast units utilize radio frequencies. This range does not produce the same effects as direct contact, and may be harmful to your cells.

Therefore, it is a complete waste of time and money to build a radio broadcast applicator when the simple, proven and inexpensive electrode patch means of application works far better. Electrode patches are many times faster, and infinitely safer.

The suggestion that current energy does not penetrate beyond the skin is pure nonsense, for a number of very obvious reasons. Thus we strongly recommend that you avoid devices which are sold using this claim. It is totally false, and here’s why:

On contact, the nerves are the electrical circuitry of the body; and as you might expect, they are the most conductive tissue of the body. The next is the blood. Obviously these components are present almost everywhere in your body, and they provide excellent conduit for delivering energy to any organ or tissue.

If you cook a hot dog with radio/microwave, it cooks from the outside in. Try it with a beef roast. Cook it half way, and then take it out and slice it open to confirm this. So, the claim that current does not penetrate and radio does, is completely the opposite of the truth.

If you are considering a manufacturer who claims that radio frequencies penetrate more readily then direct current, beware. Common sense, and real science, will dictate otherwise.

Current stimulates the body. (If it didn’t, then how would all those muscle stimulators work?) The stimulus provided by direct current helps to optimize the function of all your cells, even as it proves mortal to the pathogens. For this reason, there are countless benefits to using direct application devices.

The TENS device (used for pain relief for about 50 years in mainstream medicine), is proven effective for millions. The device we make at JWLABS is similar to a TENS unit, but it is much more refined and far more potent. It’s effective for a wide variety of applications, where the TENS unit is designed primarily for joint pain and back pain. The demonstrable penetration of current via the nerves is well established, and it cannot possibly be responsibly refuted.

Why JWLABS is better:

First, we have been doing this a lot longer than anyone else, by a good margin. We have been listening to our customers’ feedback for more than 27 years. The methods we use have been established by our users, with our equipment. We don’t just work with a collection of frequency numbers we got off a free internet site.

Second, our Model A is a solid-state equivalent to our legendary Model B, which today would cost 10 times what Model A costs. Since Model A is controlled by Model B session recordings, it is the same therapy you would get from a $15,000 machine, as tuned by an expert.

Third, since we have the experience and the confidence that only direct experience can bring, we are happy to provide unlimited customer service free of charge, to ensure that all JWLABS customers achieve the optimum results that are possible. Furthermore, Model A comes with everything you need to get started; and it is supported with a lifetime replacement warranty.

Upon reading our material and discussing with us your questions and concerns, we trust that you will conclude that we stand apart from others in this industry. We look forward to serving you!

JWLABS’ Model A Rife machine – safe, effective, and easy to use.

To say that the Model A and JW Labs are the cornerstone of our family’s health program would be an understatement. We have successfully used the Model A to treat the following:

•  Fungal infections (nail fungus, athletes’ foot)

• Candida

• Infections and mastitis from breastfeeding; my wife has had three infections, all of which were treated rapidly, without the need for antibiotics or hospital/doctor visits.

• Strep throat — again, no need for antibiotics

• Numerous colds and flu-like illnesses

When initially investigating Rife technology, I found a great deal of misleading information and, sadly, a number of outright charlatans. By contrast, John Wright is a font of deep knowledge, common sense, and integrity. He makes himself constantly available for guidance and advice. It is not difficult to use the Model A (John has made it very easy), but there are occasions when one needs guidance on how best to use the machine. John and Cherry are always available to assist. In fact, the Model A is far more powerful, safe, and sophisticated than anything that was available in Royal Rife’s day.

John offers a lifetime replacement/repair warranty. Just recently, our machine, after many years of flawless service, needed a minor repair. I sent it to John, and within a few days he sent me a new one!

Frankly, I only tend to get sick when I don’t use the machine prophylactically. It is important to use the Model A regularly when one is well to prevent illness, and not to treat only after one has become ill.

I believe that if every family in America owned a Model A, the health of our nation would take a quantum leap forward. I don’t expect that to happen anytime soon, but I do wholeheartedly recommend the Model A and JW Labs. It is the best investment you can make in your health, and you owe it to yourself to buy it from the most knowledgeable and most honest person selling these machines: John Wright.

By the way, I have no financial connection to JW Labs, and this testimonial is unsolicited. I’m simply thrilled about how this machine has helped myself and my family, and feel it’s important to spread the word.

N. Myers, CT                                                                                                                            February, 2013

Invest in your family’s health with JWLABS’ Model A.

My approach to life is that it’s an adventure, with interesting problems to solve. This is reflected in my approach to health, which involves both learning from others and some trial and error. I try different things and learn what works and what doesn’t work. Of course I’ve had lots of failures and I try to learn from them. And I enjoy talking to and learning from the people at JWLABS. I’m responsible for my own health and therefore make my own health decisions.

I don’t fear cancer, but view cancer as an interesting problem to solve. I don’t suggest that others use my approach to health, but I have been successful more than once working with the people at JWLABS. They are not medical practitioners, but their Model A and their thoughtful coaching has proven to be invaluable to me and my wife.

I’ve had the Model A Rife Machine for several years and used it about two times a month with the electrodes on my feet for an hour each time. About eight months ago I got a sore that oozed two or three drops of blood each day on the side of my jaw with a large lump under it. I also had a similar sore on my back, but without the lump and without any bleeding. After about two months I got concerned and increased the use of the Rife Machine to twice a week. After about two months the lump under the sore on my face disappeared, but the sore remained. I continued to use the machine for several more months with no further improvement.

My dermatologist did a biopsy on the two sores and said that they were both basal cell carcinoma. The doctor set up a surgery date in six weeks. I didn’t want surgery, and below is the alternative action I took.

During the next five weeks I used the Rife Machine about four times a week for one hour sessions, placing the electrodes directly on the sores instead of on my feet. During the first two days the sore on my face bled two or three drops while using the Rife Machine and another two or three drops during the day. On the third day and through the rest of the week, there was no bleeding while using the Rife Machine or during the rest of the day. By the end of the first week, the sores were dry with a scab and the diameter of the sore had been reduced from half of an inch to 1/4 inch. By the end of the fifth week there was a small pink spot about 1/8 of an inch in diameter where the sores used to be.

The next week I saw my dermatologist and he was not impressed. He wanted to perform surgery to remove the cancer. Instead, I insisted that he do the biopsies again and he said that he was 100% certain that the results would be the same. He said that skin cancer does not get better and the only thing that can be done is surgery. I may be the only person this dermatologist ever had who insisted on another biopsy rather than going along with his recommendation of surgery.

While I was in my doctor’s office, I felt like I was on a medical production line. The doctor identifies possible skin cancer and the next step is to do a biopsy. Then the next step if it’s cancer is to do surgery. No talking, no thinking, just follow the doctor’s orders. These doctors adopt a God-like approach and their patients become their willing followers.

It’s helpful to understand how doctors make their money and how this affects their approach to medical issues and their patient’s health. Most doctors lose money on office visits, but make money by finding problems during the office visit that they can resolve thru surgery or some other medical procedure. Without surgery or these other medical procedures, many doctors couldn’t afford to be in business. A lot of this has to do with how doctors are reimbursed by insurance companies.

A few days later I got the results of the biopsies. There was no cancer on my back, but I still had cancer on the face although it had decreased in size.

I had a discussion with my doctor’s technician on my biopsies and he shared the views of the doctor. He said that cancer doesn’t go away on its own; it must be removed by surgery. He said that the cancer went away on my back because the biopsy is surgery and it was the biopsy that removed the cancer. As for the cancer on my face, the biopsy removed some of the cancer which is why the second biopsy found less cancer.

This is the first time that I had heard that cancer could be cured by a biopsy! A biopsy is minor surgery that does remove tissue. So I guess you can see the logic doctors are using. It’s more like a half-truth that doctors hide behind. Doctors need a reason to explain their failures and this reason seemed to satisfy them. I promptly changed doctors and my new dermatologist didn’t find any cancer at all.

My new dermatologist didn’t accept any insurance, so the full payment came from me. The difference in service was incredible! I was able to have a good one-on-one conversation with the new doctor. She went over the options with me, without pushing me in any direction. She understood that the medical decisions were mine to make, not hers.

I suggest that if anyone can afford it, they should get away from using insurance. The way that insurance companies are reimbursing doctors determines the procedures they urge you to undergo. In my opinion, these doctors are deciding what’s best for them financially rather than what’s best for their patients.

Be sure to talk to John and Cherry at JWLABS to discuss how to address your medical issues with the Model A. If I had consulted with them during this experience, it would have shortened my treatment time.

I feel that the Rife Machine empowers me. I don’t fear cancer because I know it’s often curable without surgery, radiation or chemotherapy. For people with cancer, make sure that your PH is balanced.

I believe that attitude significantly influences the outcome of health issues. Don’t be afraid of health issues, but look at them as an opportunity to improve your quality of life.

I wish everyone the best of luck pursuing your health adventures.

John H., Virginia

March, 2013

I started out building Rife-type devices for folks in 1987. My estimation of the industry at that time was such that I was reluctant to enter it. Even today, my opinion of most of the information on the internet which claims to represent Rife technology is that it is grossly misleading….or just plain WRONG!

Many of the devices found on the market today are cheap, off-the-shelf devices which deliver a modicum of effect. Because there are benefits to applying current to the body in general, these devices may help the well person to feel somewhat better; but they are hardly the instrument of choice when addressing a health crisis. Mostly, these devices are based on unquestioned interpretations of the technology. They reflect little to no research; rather, they are based on information garnered elsewhere on the internet. A classic example of what I call the “dumbing down” of the technology.

Needless to say, these devices are not accompanied with any level of customer support. And if you break it, you lose it.

The reason people choose JWLABS is that they can see that I am sincere about what I am doing. I have done actual development of the technology during the course of my 27 years in the industry. For that reason alone, I have more to offer. My genuine concern for your outcome is reflected in my commitment to providing personalized coaching, as needed. And, of course, I provide an extended repair/replacement warranty. This, because I am confident of the Model A’s reliability; and because I am committed to you having an instrument in good working order.

John Wright – developing   Rife machines for 27 years

It’s unfortunate that it has taken such a long time for the public to recognize the importance of Rife technology. (Little do they know that the first direct contact machines were patented in the 1890′s.) Sadly, people find that when all conventional methods have failed, only the alternatives remain.

Most folks begin with only the most rudimentary folklore; and this, at the point where there seems to be no other reasonable solution to their problems. They are often thrust out of the conventional paradigm only after they have come to feel very much betrayed by mainstream medicine. Consequently, they are often flat broke and broken-hearted.

Thus they start out on a hunt for promoters of any “rife machine” on the web. It is horrendously unfair for these folks to have to wade through an onslaught of fraudulent claims and fake products.

A beginner’s search will produce about 90% nonsense, and unless you promptly find www.jwlabs.com or www.rifemachine.com near the top of the list on the Search Engine monopolies, you might not find me until you have already been robbed a few times.

This is not to say that there are no other credible researchers in this technology; but the Rife machine industry is unregulated, and has become a haven for charlatans. Even the would-be de-bunkers of the technology are fraudulent. They pretend to be concerned about the consumer and perhaps the public safety when, in fact, they are placed there by larger interests just to run interference.

It’s a travesty that the climate in the health care industry has become one of disease management, a diversion from the original intention of truly attending to and preserving wellness. This was the beginning of the end of truth in medicine. Likewise, it’s unfortunate that some purveyors of equipment which claim to be Rife machines are ill-informed or deliberately mis-leading the public. Some have even resorted to nonsensical “comparisons” with their competitors to make themselves look superior. And yes, some have even outright lied.

What is one to do? How does the novice sort out fact from fiction? Whether you are just beginning to explore the Rife tradition, or you are an experienced user, practitioner, or scientific researcher, I implore you to call me direct before you make a decision about your investment in a Rife machine.

Do your homework first. Read through the material on our web sites so you have a feel for the fundamentals. Then, let’s have a straightforward discussion. About the science. About the facts. And about your concerns. I will do my best to help you clear the muddy waters so you can make a decision you feel good about.

I hope you will elect to work with JWLABS. But even if that’s not the path you choose, I can assure you that you will have the wherewithal to ask better questions, to recognize the fundamental truths of the technology, and to connect the dots. You cannot make sound decisions without good, reliable information. At our web sites, and in conversation, we strive to get the right information to you in a way that is understandable. Only then will you be able to move forward with confidence.

This is about more than recovering our health; it’s about recovering our dignity!

You can reach me at 888-523-8695.

It’s so difficult to be forced to wade through the details of any technology, especially new technology, when you are ill. In that case your search for information is generally motivated by an underlying, but severe frustration. A frustration that comes from trying to grapple with the realization that there is seemingly no help, no easy solution, no clear path, and no well marked trails to follow.

One of the major issues many new users have to take on is the apparent complete lack of consensus on the Internet. The simple problem of how to choose a Rife product. For the greatest majority of new users at JWLABS, the Rife Machine is a relatively new concept, and in some cases it is totally foreign.

With a broad range of possible prices and complexity, the manufacturers have covered every possible price range in order to fit every budget; but still, for the most part, they provide no reasonable guidance for folks who need answers, not more unanswerable questions.

For those who are up to the challenge, it’s fairly easy to get through the obstacle course with common sense and a basic understanding of the technology itself. But it’s very difficult for those who have neither the time nor the patience for another challenge. Regardless of how smart they are.

One simply cannot make an informed choice from such a chaotic selection of hardware, a mixture of conflicting theories, and a fringe element that ranges from theoretical physicists to UFO enthusiasts. Every one is telling a different story.

It’s like coming through time from 200 years ago, and trying to select a used car. Folks need to have enough experience to make a good choice for themselves. There is simply no way around it.

Here are a few things to bear in mind:

• First, this technology may be new to you, but it is not new. In fact, every part of it is old, and quite familiar if you know what to look for.

• Beware of the subconscious tendency to believe the first thing you hear, simply because it is the first thing you heard. True that it is good to enter into anything that is new to you with child-like open mindedness, but it is imperative that you know where to draw the line.

• Many so-called Rife Machines, are not really products; and for the most part, do not fill the expectations of the modern consumer. They merely emulate enough of the technology to fulfill their marketing goals.

There are three basic types of Rife device: Electric, Magnetic, and Radio. Electric, or direct current type machines are the best by far for the simple reason that it is the only direct method of application. All other means, regardless of how these are mixed together, are indirect, and therefore far less effective.

Magnetic, or pulsed electro-magnets, and Radio, (which is broadcast) both completely lack the effects of stimulus. Since you cannot feel them while they are working, they do not give you any obvious clues about how much you are getting, either too much or too little.

All three are simply variations on the same basic theme, which is to put frequency energy into the body at power. By this I mean, not subtle energy, like Radionics, or Reiki. And not superfluous methods like sound or light machines. No, not ultra sound, and not LASERs either.

In reality, about 80 percent of what we have come to expect from a Rife device, can only be accomplished by using the most potent of the direct electric type of machine. 

Although the amount of electrical power that a machine can deliver is important to it’s efficacy, total power is only one of many relevant factors that determines the efficiency of a direct contact type. The human body can only flow a certain amount to electrical energy without danger. More than this is a waste of time, and potentially harmful.

Another important aspect of the device is its refinement. You can buy a function generator/ frequency device at any electronics supply for a few hundred dollars, and if you know what to do, you can use it as a very crude Rife machine. A fact that is not lost on most of the so-called Rife machine makers. They have been selling people modified function generators as Rife machines for generations.

In the last 15 years we have seen them rise to a point that is marginally above simply re-purposing old function generators. Now they repackage them as well, which is much more convincing. But does that constitute a real Rife machine? Yes and No.

It’s practically child’s play to show legally that a function generator is a Rife machine, even if all that is done to it is to change the label. It is not, in fact, a purpose-built instrument that has been developed through trial and error for decades. If it were, it might be rightly called a product.

But if it does not perform substantially the job for which it is represented it is still a rip-off, fake-as-a- four-dollar-bill, placebo Rife machine. You should not waste your time and money on Rife machines that are “technically” Rife machines, but don’t get anywhere even close to what most users are looking for.

So, rather than going down to the used car lot, and taking your chances, visit with the real professionals in the field who have vast man hours and equally vast resources invested in the success of the user. Folks who are genuinely committed to giving each new user the personalized coaching and one-on-one attention you need to proceed with confidence.

JWLABS, day or night. 888-523-8695

Definition

In the beginning, we were concerned with the problem of sorting out the truth about Rife technology before we could begin engineering.

There are three basic electromagnetic means available for the transference of energy to the body for the purpose of delivering and controlling a variety of frequency potentials. Presumably, all three are capable of a certain amount of induced reaction in the user, or subject.

Radio energy, electron energy, and magnetic energy.

The examples of devices Rife had used in his experiments that I was aware of at that time, did not include the magnetic therapy.

There were engineering reasons behind why we chose not to attempt magnetism, but we did research it. We found the method had a long history in alternative health, and we met with clinicians who had experimented with it for decades on thousands of cases. Later we openly and publicly speculated on the possible ways a custom built, (or purpose-built) device using only magnetism for performing Rife therapy, might be designed and we found it marginally viable.

We were not the first to do this. A flurry of experiments and new designs emerged promptly afterward; and approved products of this kind began to appear on the market within 2 years. As predicted, these devices were effective. But even today, they do not entirely fulfill the expectations of the average Rife machine user.

This leaves only Radio and Electron energies.

Rife had employed both in his basic hardware. This consisted of a frequency instrument and a microscope. The microscope was used to observe and to confirm the effects of the Frequency instrument. The instrument of choice was actually just a function generator. The Electrodes (being the rods and plates)  and the Ray Tube (charged gas in a modified X-Ray tube) were each modes of application, or “applicators”. The Tube was for treating the microscope, and the electrodes were for treating the subject. The hardware definition for a Rife Machine is established, as Royal Rife himself used ordinary function generators as therapy devices.

In years past, some makers of Rife therapy devices were literally using unmodified function generators, with nothing more than a label change. This is still done today, although the function generator is often repackaged to give it a purpose-built look. (Rife Digital type devices.)

Character

JWLABS model machines are purpose-built throughout. We researched and tested the therapy beginning with a proven circuit theory that only contained the components necessary for this kind of electro-stimulus. Only the therapy parameters for the signal are necessary; all the other signals that a typical function generator, or signal generator, can make have no appreciable therapeutic value. (Wave forms, and range of frequency.) Also, the tuning characteristics and the controls of a function generator are quite inadequate for therapeutic applications, as they are not made for the purpose.

We have been developing purpose-built Rife Machines, or electro-therapy devices for decades. The design of JWLABS Model devices is intended to appeal to users not interested in learning any more about the technology than they require.

Many JWLABS customers have very specific, or very critical needs, and very little time or money left to deal with them. This means simpler, more cost effective, and more automated devices are the primary issues of the apparent public demand. Thus, our introduction of LifeWires.

JWLABS recorded frequency sessions are a form of music. They are hand-tuned and played with skill, much like any musical instrument is played and the music recorded. The needs of the user are anticipated in the contents of the recording, or score, and the full effects of the therapy can be realized with little or no education required. Safety is the only concern.

Method

The Model A cannot harm human cells, does not cause disease, and has no direct side effects. However, it is extremely potent. Over-use of the Model A usually results in an increase in symptoms. This can be a real hazard, especially for a new user with a long history of chronic disease. This is not the famous “Herxheimer effect”. It is the user’s physical reaction to massive immune stimulus and sudden detoxification of the system. A healing crisis.

There is no danger, provided the user knows to stop the therapy and allow the effects to pass before they begin again.

Our latest Development: LiveWires    

The Model A-1 called “LiveWires” has been created with the same output circuit as Model A-3 (Tactio); but Live Wires has no switches, no lights, no plugs or jacks, and the wires are permanently affixed. It has only a simple amplitude control. Input cable, power, and electrode leads extend from the miniature housing. Although it is equal to the A-3 in its potential, it is much simpler and therefore less complex to operate.

JW LiveWires may not be suitable for all applications, as it is a simpler device. It may in some cases lack the refinement desired to comfortably apply to the more sensitive parts of the body, compared to Model A-3 Tactio ®, which has more precise amplitude control and two sets of leads, rather than only one.

Support for Model A-3 is unlimited; however, LiveWires users must rely on the information provided on-line, as well as their own experience.

Model A-3 and LiveWires users can target any set of frequencies by choosing an appropriate title and track on RifeTherapy.com  Needless to say, there are significant advantages to utilizing our skillfully tuned sessions.

LiveWires is already being enthusiastically received – both by folks who are new to the technology, and our seasoned Model A users. In fact, we have a pre-launch waiting list for the units.

Model A users will employ LiveWires as a performance accessory to their machine, doubling their potential output and adding a third set of electrode wires. Stand-alone users will enjoy the same output as Model A, in a cost-effective and easy-to-use format.

The post JWLABS – Advancing Rife Technology appeared first on Rife Machine.

I’m guessing the most common question new potential customers ask me is. “What’s the difference between JWLABS Model Rife machines and others”.

It’s a question that always perks my ears. I always listen very carefully to the way the person responds to my answer. I always tell them the same thing.

I explain that there are technically only 3 basic types of Rife machines. Radio Broadcast, Pulsed Magnetism, and Direct Current. I make the direct one because all other methods are essentially indirect, and therefore far less effective.

Simple, common sense answers I have been explaining to my customers for decades. On occasion they will ask me to compare my device to others that are also direct.

I explain that my sessions are recorded from JWLABS Model B. They are hand-tuned, using the full range of relevant traditional frequencies with targeted numbers, as well as specific sweeps to within as much as a billionth of a hertz. Vastly superior to other, less effective tuning methods.

JWLABS’ Model A version 7

When that is still not enough to satisfy the question, my red flags go up. Other makes of this technology are and have been inferior to what we are doing at JWLABS for the simple reason that we have been producing and developing purpose-built instruments of this kind much longer than anyone else.We have a fantastic track record, and a vast history of successful users worldwide.

We started development in 1986-87 with original materials that we obtained from unimpeachable sources.  Our goals have always included a progressively cost-effective design that almost anyone can afford. The fact that we can do it a lot cheaper and more efficiently, with warranty and customer support, should be enough  for the average prospective user to realize we are the best choice.

Sometimes they push the issue, and begin to go into the various features of other maker’s Rife machines. I have to disqualify myself at that point, because if they want information about other makes, they should go to them for answers. Obviously.

But as anyone who has ever been in retail for any amount of time will tell you, you can’t please everybody. There’s always going to be somebody who finds fault in what you are doing, even if you’re only selling girl scout cookies. It’s just the way of the world nowadays.

Yet still, there are those who will continue to press. I explain that I am not really that interested in what other makers are doing, and in most cases I find a comparison between my products and my competitors rather insulting. Sometimes it’s like trying to compare a new Cadillac with a 1949 Chevy pick-up for someone who has no license, and never driven or owned a car. And sometimes it’s like comparing a new Cadillac to a picture of a pile of used tires. No reason to get real technical about it, I can just refer them back to my web sites. The material is there.

By this time I have spent half an hour of my valuable time on the phone with this person. And yes, it still happens, they start accusing me of being evasive. This, after half an hour of trying to answer the questions of a stranger, and having offered them the most extensive information web site on the subject in the world. Go figure.

But that picture is about to change, I’m happy to say. I’m expecting now that LiveWires is going on the market, the most frequently asked question is going to be: What’s the difference between JWLiveWires, and JWLABS’ Model A-3?

In 1986, during the 10 months of research and development for our first successful Model B, we built the very first successful Model A. It was battery-powered. It had fixed wires. Amplitude was controlled by a thumb wheel. It was built and cast into a very simple enclosure.

The Model A-1 was designed out of necessity, as a prototype to begin our experiments with the whole idea of recorded sessions for the first time. There were, therefore, absolutely no added appointments. The Model A-1 was not considered to be marketable at all, as it was very far removed from what users expected in a Rife Machine throughout that entire era.

JWLABS’ Model A-3
Solid-state equivalent to Model B

The first Model A-3’s were marketed in 1991. All Model A production stopped from 1992 until 2004, for lack of interest. Development however, continued and a new Model A-3 design was perfected in 2004, and has been in production ever since.

After 10 years of A-3 success, our manufacturing engineer had the idea that the entire Model A circuit could be made so small that it would be nothing more than a “lump in the wire” as he put it. We toyed with that idea, and it remained the “lump in the wire” until we finally realized that it was inevitable. The market was ready for it now, so using everything we had learned about the Model A circuit up to this point, we could also build a successful Model A-1.

The Model A-1 revives some of the original design cues of the original Model A, in that it is very simple, has  no lights or jacks, and the entire thing is held together by casting the circuit board right into the enclosure with a special casting compound. There are no fasteners and it cannot be opened, as it is a solid piece. This makes it tougher and more reliable.

Of course, the “lump in the wire” as a name just wouldn’t fly.

In short however, Live Wires (Model A-1) has the same output as the A-3. It accepts the same frequency input as well. But it does not have replaceable wires. There are no indicator lights, no switches or jacks. It does not have a battery box, a ten-turn potentiometer, or a high tech enclosure. They are both highly portable but in many ways LiveWires is less versatile.

One of the greatest advantages of LiveWires is it’s low cost. The very low cost and ease of use that is characteristic of LiveWires makes it the perfect machine for new users and beginners.

For Model A -3 users, LiveWires can be simply plugged into the A-3 headphone jack to expand your total contacts, and double your power and control.

Double the power is a lot. Both have 68 volts, so the total output potential is 136 volts when both are set at maximum. Using one set of contacts on the A-3 plus the set on Live Wires, also allows you to have separate amplitude control for each set. A very handy feature for some users.

If you want to, you can have both machines working separately, each with a different input device. For instance, the input of Model A-3 could be taken from a disc player, and LiveWires could get input from an on-line session. By doing this, a user could do their daily maintenance routine at the same time they are doing a local session, each with separate input as well as output and amplitude controls. In most cases this would cut their actual session time in half, while still doing the same number of minutes per session. Quite valuable for those doing longer daily sessions and who also need to save time.

To power both devices, you would probably have the A-3 plugged into the AC wall adapter, and Live Wires plugged into the USB port on your laptop. But both Model A-3 and LiveWires will accept USB or AC adapter for power.

I expect to see the tide turning. Fewer folks asking me to compare JWLABS machines with others on the market. More asking about the differences between Model A-1 (LiveWires) and Model A-3.

To review:

• Both units are of Model A design.
  
• Big difference in cost.
• A3 is much better appointed, and includes personal coaching.
• LiveWires (a-1) is very easy to use, relies on internet and wifi.

For more information about JWLiveWires, please visit JWLiveWires.com/

Double the power of your Rife session by adding LiveWires to your Model A-3.

The post Rife Machines Comparison: What’s the Difference? appeared first on Rife Machine.

Back in the old days, Rife machines were much more delicate, and fairly temperamental. To illustrate just how extreme this could sometimes be, the JWLABS Model B always had a grounded binding post, and instructions that explained how to ground the machine using a wire bolted to a garden spade. The wire was inserted into the binding post, and the spade was pushed into the thoroughly watered soil.  

Today we laugh that such a measure would be necessary. Of course, Model B had a huge power supply transformer and a couple  of vacuum tubes that operated at around 350 volts, so if the building ground was overloaded or at all faulty, the unit would not have enough ground contact to operate properly. It was a common problem. Sometimes the user would have to call in the electric company or a contractor to correct a faulty house ground.

Model B machines were a lot more complicated, and had a lot more components that were subject to damage and failure. When a customer reported a problem with the machine, the list of things we had to cover over the phone for troubleshooting was extensive. We had to confirm that the machine was truly not operating properly before it was returned for replacement under warranty, .

Today, JWLABS Model machines do not require any high voltage components, so the entire circuit can operate on 6 volts DC/battery power. And there’s a lot less to go wrong. But there’s never a dull moment when it comes to troubleshooting.

The most commonly reported failure on any Model A is no output.The most common reason for this is that the volume of the media player is not set high enough for Model A to “hear”. We don’t get many machines back, but nine out of ten Model A machines that are returned due to no output, have nothing wrong with them.

For most people that might seem silly or ridiculous; but it’s not, it’s serious. Most folks have no problem understanding this. Our users are not most folks, however. Many have critical needs, and rely heavily on their JWLABS Model A machine daily, just to get by. For some, overcoming simple problems can be a challenge. For a small percentage of users, regular one-on-one reviews of the basic operation of the machine are essential because they forget, and lose their instructions (CDs, manuals and/or support web sites).

Even for some completely competent folks, connecting the machine to a media player is just too busy, and involves too many wires for them to be comfortable, like when they use it in the car. Doesn’t seem like much to insert an input cable and press play; but for some, its just not simple enough to make it as easy as they would prefer.

We will be working on that.

For now, JWLABS Model A-1 (Live Wires) is a simpler device that we hope will satisfy some of the folks who find the A-3 at times, too complicated and too cumbersome. It’s great as a stand-alone device; and for the more adventurous, it will serve as an extraordinary performance package when paired with the Model A.

 Learn more about Model A and LiveWires here:

www.rifemachine.com/products

www.jwlivewires.com

The post Rife Machines – The Most Frequent Failure appeared first on Rife Machine.

John Wright discusses his Model A Rife machine, and what you might expect from using it.

The basic effects of using this frequency instrument will fascinate you. Not only does it de-vitalize pathogens such as viruses, bacteria, fungi, and parasites, it optimizes your cellular function.

Learn why JWLABS’ Model A Rife machine is a “must-have” for those who wish to optimize their health and protect their well-being.

People routinely experience an improvement in energy, improved immune system, and general detoxification.  Application of current encourages proper function of organs, which includes the liberation of toxins. The technology takes advantage of the difference between the fragile cellular wall structure of pathogens (such as viruses, bacteria, etc.) and the cell wall of the much stronger cell wall of the human cells. Thus, the direct current which is mortal to microbes serves as a beneficial stimulus to human cells.

For technical paper shared by the DOD corroborating this effect, see http://jwlabs.com/rife-technology-2/skeptical/pentagon/

The post Model A Rife machine – Basic Effects appeared first on Rife Machine.

To read Part One, go HERE: http://rifemachine.com/discussions-with-john-wright/rife-follies-saga-instant-expert/

There are a lot of ways we as a public, and as a business community can use the knowledge that we have come to call Rife Therapy. And there are a wide variety of safe and effective ways to apply the therapeutic range of frequencies, from music, to jogging. From massage devices to magnetic pulse.

One of the best ways is by direct electrons. The same way we do it. A method that has a very long history, going back well over 100 years. It is known to be safe and effective for a broad variety of applications.

Radio frequencies have the potential to harm human cells.

Those fatally misguided folks using energies that are known to be harmful to the body are just poisoning the cake. Radio energy is not the best way, because it is known to be harmful; and the fact that it can be oscillated at the right frequency that corresponds to audio frequency does not make it better. Rife used it to treat the microscope sample, at a time when the dangers of radio energy were not well understood. Treating a sample consisting of less than a single drop on an unprotected glass slide may prove the theory, but has literally no meaningful therapeutic value in practice.

Rife used electrode contacts to carry out the therapy itself because radio energy tends to bounce off, and does not penetrate. Devices that rely on radio broadcast, are well known to have very limited success in the long term. We know this because they have been made and used for a long time. It’s a reality that will come to light again in the public eye sooner or later.

To take it one more step for illustration purposes, it was recently reported that a successful device has been tested that uses ionizing radiation, probably X-Rays, by oscillating the energy at audio frequencies. Will it work? Absolutely. Will it kill you? Absolutely. In the same slow and undetectable and normally untraceable way that X-Rays have been killing people since they were first employed.

The physicians oath is to do no harm, and it seems that this has been abandoned when it comes to electro-medical technologies. Using things on sick people that are obviously harmful, untested and dangerous is something that profiteers do, not genuine researchers. Not genuine health advocates, and not genuine business people either.

The repackaging of function generator circuit boards is nothing more than a thin disguise. These are very challenging to program in any way that we would normally use in the therapy for the average user. Their parameters far exceed what is comfortable or readily repeatable for someone who just wants to get the therapy done, and not have to spend a lot of time and/or mental muscle just to make the machine work.

Even though we can demonstrate that when using a given energy, there are specific frequencies which seem to be very effective in destroying equally specific micro organisms, that mechanism alone is very often not enough to make the kind of changes most users are looking for.

Many forms of cancer for example, are encapsulated, and thereby isolated from the immune system. They also lack any kind of natural drainage. If the contents of the tumor has no means of exit, killing off some or all of the microbial components (of which there are often several, and rarely only one type, each with a different resonant or mortal frequency) present is not going to have any appreciable effect on the condition. Cases of this kind require detoxifying, anti-inflammation, increased circulation and immune stimulus. A completely different set of frequencies, in addition to the specific, and/or traditional.

Electron energy has the particular advantage of being the only truly direct method. The fact that you can feel it provides a natural regulator, requiring no expertise. Just keep it at a level that feels comfortable. That comfort level is an electrocuting energy to biological parasites from virus to liver flukes. It is also a powerful immune stimulus and detoxifier. Microbial electrocution frequencies is an extremely potent and efficient therapeutic modality that can only be accomplished using direct contact. All other methods being indirect, and therefore considerably less potent in therapeutic applications, since most of the energy is lost.

JWLABS’ Model A

With direct applications, no energy is lost. Electrode patches can be applied to specifically target the structures of the body easily by a number of obvious physiological means, including the nerves, the muscles, the organs, the bones, the circulatory system, the lymph system, the urinary system, etc. Very specific, totally reliable, almost surgical.

It is also highly compatible with many natural therapeutic disciplines, including Chiropractic, Acupuncture and Acupressure, Muscle Testing, Yoga, Reike, and the Budwig Protocols, to name only a few.

It has been said that “pad machines” meaning Direct Transdermal Electron therapy does not penetrate. A laughable assertion, certainly, for anyone who has any experience with electrical energy. Obviously the nerves, the blood vessels, the fluid filled organs, the skin and muscles, all are excellent conductors of electricity. The introduction of the correct electric charge is particularly effective when adjusted to the resonant, mortal oscillatory rate, just as Rife claimed, but electron energy is still deadly to pathogen at any frequency.

Obviously, there is a lot more to this therapy than merely Rife frequencies. ATP is stimulated, the white blood cells accelerate to as much as 200% of normal. Every cell in the body receives a charge, and when an electrical charge is present a chemical change always follows. All the glands and organs are forced a little more towards normal at each session.

Controlled electro motive forces are incorporated into JWLABS recorded therapy titles to encourage stones to pass, to release blockages, to liquify arterial plaque, to melt away blood clots, to condition and revitalize the blood, and the entire system. It normalizes the endocrine system, the gastrointestinal system, the nervous system, and the immune system. It can easily reach any tissue and begin to force out toxins that literally cannot be moved out any other way.

There is a lot more to this thing we call Rife therapy. Thank goodness we are not limited to the original list of traditional frequencies that John Crane published back in the 1970’s. Now widely published on the Internet. Everybody knows them. It’s the same old argument.

Years ago, Barry Lynes and Peter Heller got their ducks in a row to reproduce Rife’s original Virus Microscope and Ray Tube. They were unable to restore the one Rife scope they had, and the venture ended there. It shows that, even very intelligent, innocent people are taken in by the lure of what seems to be a simple science. Here’s two guys with no experience and no expertise in the field, trying to sell what could only have been erroneous Rife equipment.

Rife Follies isn’t funny, because the public health and well being is at stake. The industry should not be full of charlatans, amateurs, and money feverish speculators. To avoid and to counter this trend, we have brought down the cost of the technology so that most people will not be so easily fooled by so many unnecessary bells and whistles and purple flashing light bulbs.

JW Live Wires has arrived!

Read PART THREE       http://rifemachine.com/discussions-with-john-wright/rife-follies-part-3-rife-digital-comparison/

To view our products go to www.rifemachine.com/products

The post Rife Follies – Part Two: Basic Truths About Rife Technology appeared first on Rife Machine.

JWLABS’ Engineer Compares Specs

This is an addendum to our Rife Follies series. When asked to examine the printed specs of Rife Digital Ultimate, our seasoned engineer provided the following responses, which we found hilarious.

Engineer: Model A has the same.

Engineer: This doesn’t mean anything. Gibberish.

Rife Digital Ultimate

Engineer: Gibberish. The power button would definitely interrupt the program sequence?!?

Note: Remarks from our engineer do not constitute a claim on the part of JWLABS. We provide this information from a highly trained craftsman in order to help the reader to make an educated decision about what’s real in this industry.

Engineer’s follow-up  11/24/14:

I looked briefly at the zapper [Rife Digital] you sent.  I took it apart and jotted down a few notes:

• There is no adjustment on the intensity.  You have 16V of output and that’s it.
• This machine is UNBELIEVABLY simple as a result.  They have a simple program in the micro-controller that toggles the voltage at anywhere from 10 Hz to 1 MHz. [This is engineer speak and is not exactly how it would be described to the user.]
• Clearly this thing is being built in China, despite the claims to being built in Germany.
• I would estimate that they are buying this device for under $20, but they probably have $50 worth of packaging and fancy graphic overlays on each unit.
• The “Crystal Core” is not present in the manner described in the websites you sent me.  Instead, they have a standard quartz crystal that is used to operate the micro-controller (all micro-controllers require a crystal).
• This design is inferior to the Model A in many aspects.  The most important features of the Model A (with respect to the Zapper) is the complexity of the waveforms that John Wright has recorded, the ability to stimulate using music, and the ability to control the intensity of the waveform.

Postscript: Note that the “Pro’ device is also a duplicate product. Same specs, same packaging. Put out by the same people.

ANNOUNCEMENT:

We offer substantial discounts on trade-ins of devices made by other manufacturers. Call us at 888-891-1122 to discuss details.

Hulda Clark zapper.  She never mentioned Dr. Rife in her work.

Clark zapper with Rife’s image.       Here,  called Rife Digital.

Go HERE for Rife Follies, Part 1

To view our products, go to www.rifemachine.com

The post Rife Follies – Part 3: Rife Digital Comparison appeared first on Rife Machine.

I’ve been manufacturing state-of-the-art Rife type therapy machines for the last 30 years. I have coached tens of thousands JWLABS users, including movie stars, billionaires, top scientists and researchers from all over the world. It’s a job I take seriously because so many people are depending on me. I don’t have any formal training in medicine, but I’ve learned a few things making machines for people. One of the most interesting things I’ve learned has to do with the reaction curve that users experience.

It’s almost a perfect bell curve. On one extreme end of the curve is a small number of spectacularly successful users and on the other extreme, an equally small number of people who have problems making it work. About 80 percent fall somewhere in the middle.

Bell Curve

There is nothing unique about that. The bell curve, or something similar to it, is present in most therapies. I routinely spend the most time with the people who have problems; but having done so, it is obvious to me that most therapies don’t bother to do that. And they don’t include any effective method to indicate to the user when or how they should dial it back, or ramp it up.

I have come to see that as an indication of the effectiveness of some therapies; because if it lacks the potential of exaggerated reactions in new users, it also lacks most of its therapeutic value. Either the maker simply ignores the reactive cases or they dial back the effectiveness of the therapy as a whole to eliminate the potential for reactions.

With Rife Therapy the potential for extreme reactions exists, as it does for any therapy that is effective enough to get the results people are looking for. If the protocol is designed after the needs of those in the middle of the curve (as it usually is for most therapies), those on the extreme ends of the curve are neglected. The progress of each user of the therapy must be monitored and carefully regulated according to the results they actually get.

The policy of providing unlimited support for my users for free has served me well. They know that my only motive for doing that is to help them to be successful with their Rife Therapy. By taking the time to really listen to the users’ needs and to update regularly, I make it much easier for them to get the results they want. This also gives me the ability to see after their safety.

Most JWLABS users suffer from one or more chronic diseases. As they begin using Rife Therapy (with very few exceptions), the amount of reaction they have is consistently and immediately indicated by changes in salivary pH. The more change in pH that happens during any session, the more potential there is for extreme reaction. This effect is a reliable metric to help regulate the effects of the therapy, and provides a warning that helps to avert extreme reactions that are characteristic for a small percentage of all new users.

JWLABS’ Model A-3

The stimulated synthase of ATP in the Rife Therapy user, (or oxidative phosphorylization) has a direct impact on interstitial pH, as does the stimulation and detoxification effects. In some cases this will push pH towards the acidic side for as much as a day.

Having an average natural pH of 7.2 or above greatly increases the chances of success in overcoming chronic disease, and seriously impacts how that person feels. The overall daily comfort and vitality, the speed of recovery, organ function and even the amount of benefit one might get from any given therapy, is affected by the pH. pH is simply a measure of the balance and concentration of salts, both acid and alkaline in the body.

When the pH is consistently below 7.0 or averages 6.8 or below success with any therapy, even Rife Therapy is more difficult. Most pharmaceuticals make pH drop, and in many cases pH cannot be safely returned to a healthy level while they are in use.

Obviously, understanding and controlling pH is of great importance to anyone who suffers from chronic disease; and therefore anything that has a negative impact on it needs to be carefully managed. Learning to manage pH can be difficult for some folks, especially if they have been misinformed about it for many years.

The general population has no awareness of the real importance of pH to human health. The truth of it has been subverted in many ways and ignored due to the confusion. With the right information, pH is something the average person can competently manage and control without any professional help, almost cost free.

An awareness of pH, and an accurate knowledge of what pH readings actually mean, can make an enormous difference in the general health. In fact, for most people with chronic disease, controlling pH is the most important single thing they can do to improve their condition. If you are about to have an episode, pass a stone, a heart attack, a stroke, a migraine, a seizure, the chances are it will happen when pH has been allowed to stray far from the healthy range for some time. PH is a factor in contagion as well. The susceptibility to infectious disease increases when pH is consistently unhealthy. Colds and flu have been treated with powerful alkalizers for generations. Low pH also corresponds to an increase in symptoms in pre-existing infections like herpes and shingles.

Rife Therapy tends to change pH. The more ill, and the more toxic users are, the greater the change is likely to be after each session. Being as focused on my users’ success with the therapy as I am, helping them to overcome a systemic pH imbalance has become part of my job because when pH is under control, my users have better success. This changes where they are on the reaction curve.

The most common misconception about pH is that all you have to do is alkalize. The truth is that alkalizing only works temporarily; and over the long term, artificially alkalizing leads to toxicity. Once the person has become sufficiently toxic, they can no longer alkalize effectively. Controlling pH in a way that is safe and natural involves detoxification, not alkaline foods, water or supplements.

I always recommend that users switch to drinking only pure de-ionized water from a reverse osmosis filter to alleviate accumulated toxicity. This is superior to any distilled or otherwise filtered water. The typical argument against de-ionized water is that it tends to leech out minerals, which is exactly why we use it and why it is more beneficial to chronic sufferers.

The mainstream has a long list of hundreds, perhaps thousands, of drugs and preparations intended to treat the symptoms that arise from a prolonged pH imbalance. It is counter-productive from a corporate point of view, to regulate pH simply and inexpensively, because the increase in symptoms that occurs from pH imbalance can be converted into an income stream by creating more drugs to treat the symptoms.

It follows, therefore, that virtually all pharmaceuticals make the pH drop, and usually will hover in the danger zone around 5.5 so long as they are in use. (Prolonged pH in this range is typical of someone who is about to die). This is true of most pharmaceutical pain killers as well.

This deception would have been revealed long ago, except that conventional medicine does not check pH by saliva, or any other body fluid that would give an accurate reading. Instead they use urinary pH. The urinary pH reading is most commonly the opposite of the reading we get with saliva. When saliva is low, urinary pH is high, and vice versa. This should be obvious, but evidently it isn’t obvious enough for those making a lot of money selling drugs and supplements. When you check the oil in your car, you check it at the crankcase, where it will give you accurate information. Checking pH via urine is like checking the oil at the oil filter, where the reading can’t tell you anything that is true or useful.

It isn’t only conventional medicine that has consistently made this glaring and obvious mistake. Alternative clinics routinely offer a long list of expensive supplements and preparations, and admittedly many of these have value; but they are counter-productive if the person is already toxic, because when interstitial fluids are toxic, the patient cannot respond normally. One case in point is the well known clinic in Spain, where they load the consumer up with supplements, but never bother to check if the person is already toxic. A small percentage of their users are not toxic, and the rest can only report successes according to the placebo effect, not actual results.

In the many cases we have had who were on these supplements, we found that without even a single exception, all of their users who were toxic did not see any real improvements from their therapy. Improvements in their condition did not occur until these supplements were stopped, and pH was allowed to recover.

This pH issue is something we had to sort out for ourselves, because there was no true or accurate source that we could find back in the 1980’s. Our interest in it is directed entirely by what works best for our users; and since we take the time to give special help when our users have troubles, we have the opportunity to identify what conditions may interfere with Rife therapy which should give at least some level of success in every case.

For more discussion of JWLABS Rife therapy, see http://www.rifetutor.com

The post JWLABS Rife Therapy – The Reaction Curve appeared first on Rife Machine.

There’s a lot more to the history of Royal Rife than the facts alone. One of those things is the perspective that one has of those facts depending, of course, on your own history. So if you began observing the progress of the history personally, from start to finish, you know what came before and you know what part of it is biased or untrue.

If you become aware of the history a hundred years later your view of that very same history, even if all the facts have survived, will be extremely different.  In the case of Royal Rife, the history was being rewritten literally as it happened. People have been rewriting the story since the 1920’s, and new versions have been showing up ever since.

When I was first introduced to Rife Technology, it was as a contractor. My only interest was limited to the hardware. The history simply didn’t matter much to me. During the first year, I heard all sorts of reports about the people and the development and the hardware, mostly by word of mouth, and for several years various characters sought me out to impose upon me their version of the historic events . They often had machines and various documents to prove their claims.  I found this to be just a little strange at first, because after all, why did they feel it was so important for me to know their version?

Why did they even assume that I cared that much? Since none of the stories I got amounted to anything significant, and none corroborated another, I listened to all of it with suspicion. Barry Lynes’  book, THE CANCER CURE THAT WORKED, was yet another version. By the time I got a copy of it, I wasn’t about to subscribe to any of the accounts I had heard, because it was all contradictory.

So, all I had for a while was just a pile of conflicting stories that I didn’t care about anyway, because it was irrelevant to what I was doing. All I was concerned about, or had any reason to care about, was building the machines according to the schematics I’d been given originally by the friends and partners of Royal Rife. At this point I was vaguely aware that there was something of a competition among the proponents of the various versions of the story, which didn’t really make a whole lot of sense to me.  I wanted nothing to do with it.

The first time I was approached by real criminals, it was something of a cheap shot. The guy just called me on the phone and claimed that if I made and sold Rife machines I was going to have to pay him a royalty, because he owned the entire Rife technology. He claimed he had bought all of the materials from Royal Rife himself, and he was prepared to enforce his claims. He insisted on coming to visit the next day at my office, expecting me to open my books so he could assess what my first payment should be.   

I was not about to start paying protection. So I took certain measures to assure that he was deterred. Suffice to say that he was completely unprepared for what he was faced with when he arrived at my office, and he did not return. He did call me the next day, apparently because he had been devastated by what he found at my office, and he needed to confirm with me what had happened. That was the last I heard from him directly, but apparently the guy was fairly notorious because that story and the scuttlebutt it created continued to circulate for some time after.

The second time I was approached by gangster types, it was quite a different story. I had no clue about the guy until he showed up at my door. Then it was obvious that he was classic mafia, just like what you see in the movies. There was no denying that his look, his speech and demeanor was that of a dangerous criminal. I was expecting him at any moment to produce a Glock and start waving it around.

But instead, he had an unexpected agenda. He insisted that he was in possession of something of great value to me and my business, and it was imperative that he show it to me. What he actually presented was a highly advanced, extremely small battery-powered Rife machine which he demonstrated, and which was absolutely amazing.

At this point I realized that this guy was totally out of my league, and that he had expected me to be wealthy, and able to pay mega-bucks for his goods.  At some point, he realized that this machine was not something I could afford, so he didn’t offer it for sale, just demonstration. The technology of it was significantly beyond anything I could do at the time. This device had roughly the proportions of a personal tape recorder as was popular in those days. It was obviously intended to be carried in your shirt pocket. Evidently this unit was something designed specifically for a doctor to use on many patients each day. It appeared to be well used.

At the time, (the early 90’s), I was invested in the first Model A-3 units, and I explained the advantages of recorded sessions made on a fully manual device, and why this was so important to the success of my users. The engineering criterion of my technology was to make high quality therapy devices that were affordable, always seeking to make it more cost effective, without sacrificing any of the performance. This seemed to be a notion he hadn’t considered.  It seemed to me that he expected that only doctors or the elite would buy Rife Machines, and they would be very, very expensive.

But the fact that his device existed at all was a real eye-opener for me. Because for anyone to have developed such an advanced and polished instrument, obviously of great practical value to a medic treating soldiers ( or perhaps a scenario of  many biological warfare victims), meant that Rife technology was being developed in secret with a big budget. Like the military.

A few years earlier, in my phone conversations with officials at the Pentagon, it was suggested to me that I pursue a defense contract to build machines for use in a theater of war. They made it clear they would provide any research needed for the project by immediately putting me in contact with a research team leader. They also gave me specific instructions on how to present the idea to the right departments. Absolutely no “red tape”.  Actually, with no paperwork at all, they were evidently ready to move on it urgently. Although I certainly wanted to get such a contract, I was in no financial shape to even begin to meet their needs, or to compete with top contractors.

So the frequency instrument this guy had was very close to what I imagined such a device might look like. He declined to tell me where he had acquired it. I assumed it had been stolen. In addition to this device, he had a briefcase full of what appeared to be authentic documents from Rife’s laboratory, many of them signed by Royal Rife himself. He also showed me quite a few pictures of Rife and Crane and the equipment which I had not seen and have not seen since.

I didn’t make any offers on any of it, because I simply couldn’t afford anything as extravagant as that, and figured that the information I did have was complete enough. I didn’t believe I could learn anything of such value from it. In any event I felt that what he had, if it was really authentic, belonged in a museum along with the rest of Rife’s original pieces. I told him so, and he put his stuff away and politely departed.

Two days later my house was robbed while I slept. My garage, actually. As far as I could tell, the burglars did not enter the house. All of the completed machines I had in stock, along with the manuals were stolen. A loss in today’s dollars of about $30k, which was a lot for me then. Curiously, that was all that was taken. Expensive electronic test equipment, computers, and other scientific hardware were untouched. I was grateful I hadn’t just finished a production run and the place wasn’t stacked to the rafters, because that might have finished me. Shortly afterward, I moved the operation to a secure venue.

This was just about the time the internet started to make changes to the Rife Machine market. The days of covert operatives selling machines out of the back of a station wagon were over. As were the strong arm tactics used by profiteers, where they would very aggressively try to sell machines at absurd prices to the wealthy, and to upper middle class people suffering from cancer. Devices that would ordinarily sell for $3000, were routinely sold for $50,000 or even more.

I remember seeing John Crane’s advertisements offering a guaranteed cure for AIDS, for $50,000. I’ve forgotten where I saw these for sure; but as  I remember it, those ads were in the local newspaper. Seems crazy, but that’s how memory serves me.

~~~~~

Almost from day one of my exposure to Rife technology, I was approached by locals who had Rife Machines. Since Rife had lived in San Diego, there was a much higher public awareness of Rife technology here than anywhere else in the world. Usually they were enthusiastic about helping me by letting me learn what I could from these devices.  I examined and tested dozens of machines, many of which were home-made. These covered the full range: from devices that were made by, or contracted for, John Crane himself, to completely pathetic fakes. By fakes I mean the great majority of all so-called Rife Machines that were sold to the public for decades before my time. These were modified function generators, mostly the “antique” variety dating as far back as WWII. It was a common practice to simply paste on a printed label over that of the original manufacturer, with something like “Rife-Crane Frequency Generator”. Sometimes it was nothing more than a “Dymo Label”. Some of them had not been modified in any other way, so the therapeutic value of these fakes was at most 5 or 10 percent of a properly built machine.

The decades of this kind of fraud fairly well crushed the Rife Machine business. Machines of this kind were so grossly underpowered and the results that were possible were so disappointing, that the credibility of the technology was negatively impacted in a massive way. As far as I could gauge, I had entered the business when it was at its all-time low, and this was the apparent reason.

Crane himself built at least some devices that were very ineffective. But that wasn’t his fault; it was simply due to the fact that he was also updating the hardware to modern components. Converting a device of this kind from vacuum tubes to transistor was a lot more challenging than converting a radio; and how to do that well enough that a transistorized unit could perform the therapy equally well took time to develop.

It took the Rife Machine market a generation to get to the point where state-of-the- art components actually dominated.

The San Diego Main Library once had a special section for Rife books and publications. Again, this is because the Rife technology originated in San Diego, and during the time when Rife still had global recognition. The city was very proud to be the setting where such momentous events took place. All but one or two volumes remained at the library when we started using it in the 80’s. We were told that all the rest had been stolen.

This was the point in time when I think that lacking any credible documentation, the entire Rife story became unhinged from reality. Stories started coming out that were completely outlandish and highly unlikely in my opinion, since it appeared to me to be nothing but another round of misinformation. I knew for sure that misinformation had completely saturated the market, when I realized that I had a lot more people claiming to own original Rife microscopes than the actual number that had purportedly been built.

These microscope arguments which had once been heated, jealous, and accusative disappeared once the performance of modern digitally enhanced microscopes began to equal and ultimately to surpass Rife’s prismatic scopes.

Scientifically, even the new scopes held very insignificant importance to the therapy since all the frequencies for virus, bacteria and fungus had been established for decades. Although it was, and still is, possible to use them to show microbes being destroyed by “frequency energy”, these results are academic.

What it takes to treat a human body is far different from treating a single drop of fluid on an unprotected slide. 

The practical application of the technology to achieve consistent real world results that can be repeated and relied upon can only be convincingly shown through a large number of users whose results are confirmed both by conventional, as well as alternative testing.

Sometime in the early 90’s, I was introduced to a woman who had an original Rife Machine that needed repair.  She explained that it had been left to her by her grandfather, who had spent his professional career as a high level city official. She asked me never to reveal who they were.

It seems that as the executor of the will, she had discovered a large collection of original Rife documents and the machine in his garage. She realized that all of this had been taken from the official evidence, and was supposed to have been destroyed. I agreed to repair the machine for her if she would allow me to make copies of all her documents. Suffice to say, this material presented yet another quite different story about the activities of Royal Rife and John Crane. I was not at all surprised to find that this story, too, was not corroborated by any of the renditions I’d heard up to that point in time. It still has not been confirmed.

Although its not impossible that this information was a fabrication, there was every reason to believe it’s authenticity. It consisted of about 400 hundred pages of contracts, business letters, personal letters, legal documents, testimonials, depositions, and personal accounts of various kinds, all pertaining to Rife or to Crane. Some of it typed, and some of it hand written.

Approximately at this juncture in time I started to suspect that a high level conspiracy might exist against Rife and his technology. The idea wasn’t anything new. I’d been hearing this sort of theory for a long time, and took most of it for greatly exaggerated marketing hype. It was also typical for profiteers to claim that Rife machines wouldn’t be available much longer just to instill a sense of urgency in the prospective buyer.

It might easily be taken as coincidence that Universal Pictures began to associate everything having to do with electro-medicine with villainy, torture, insanity and mayhem, starting most notably in the 1930’s by means of movies like Frankenstein. Perhaps these movie releases had been sequenced to correspond to the times when Rife was most likely to gain major traction in the market and in the eye of the public. In any case, it was a campaign that was seriously detrimental to the prospects of the technology.

If fear of electric shock was the sentiment they wished the public to adopt, they did a pretty good job. Obviously, it has taken this long for the majority of the public to begin to accept the therapeutic value of electro-therapy.

The Royal Rife story continues, as more and more people try to write themselves into it. Or, like Hulda Clarke, try to pretend they invented the technology independently. I always figured that just by being honest, and by sincerely producing the most effective device I could, I could hardly avoid rising to the top spot in the market; because as far as I can tell, none of my competitors are doing that. Ultimately they would drop out of sight because they can’t possibly get the high percentage of successful results we normally expect with JWLABS model machines.

This theory proved to be true for a long time. But it was another thing that changed when the Internet came along. When I first put JWLABS on line in ‘96, there were fewer than 20 sites containing Rife information, none of which still exist to my knowledge. Virtually all the makers that existed at that time have since gone defunct for one reason or another. Most of my competitors over the years have been charlatans and opportunists, so they were never really competitive in any practical sense. They were often people who were going to get into trouble regardless of the business they were in. Many of them were arrested.

The Internet facilitated an exponential increase in the number of speculators and opportunists, and a corresponding amount of incorrect, deliberately misleading rhetoric. It is difficult to combat an overwhelming volume of irresponsible fabrications. The truth is not always as easy to market as fiction.

For the longest time I have been saying that the biggest single factor that interferes with the progress and acceptance of Rife technology is the preponderance of fake machines and irresponsible promoters. The unseen forces that do oppose Rife technology seem to have taken that to heart, if they are funding these high profile failures like [whats the name again?] who was slaughtered in court and imprisoned. Obviously, events like his downfall are highly damaging to public opinion. Same story for Hulda Clark and her zapper.

I have to assume that some operations are funded because their science is laughable and because their claims are quite absurd. This is especially the case with broadcast-type machines. I don’t believe this kind of Rife business is set up to sell Rife machines, when everything they say damages the credibility of the technology. Their claims are either meaningless, or scientifically unsound. It seems far more plausible that businesses such as these are created to provide a platform to distribute false information. Obviously I could be wrong, and have no proof other than my own conjecture.

But I know, I do not guess, what the possible therapeutic value of these energies really is, and how the energies work. I am sure enough about this that I cannot accept that anyone who enters into a business with sincere intentions could possibly make mistakes of that magnitude except by complete incompetence.

Like Hulda Clark never mentioning Royal Rife in her book. She couldn’t possibly have done any research on the subject whatsoever, without finding Royal Rife. I assume she didn’t mention him because that’s where she got the idea, and believing it to be so obscure that she could simply pretend she’d never heard of him. But in reality, her story is like someone who was previously completely unknown in the field, claiming to be one of the top physicists in the world, and when asked who Albert Einstein was, claims never to have heard of him before.

Certainly I can never apologize for the predominance of liars and thieves in the Rife device business. All I can do is plead my case. They can say anything they want. To be fair, I have always hoped that I was not the only sincere player in this field of endeavor. I have always assumed rhetorically that other ethical makers exist. I have to believe. I have just never heard of them as yet. If I am satisfied that they are competent and honest, by whatever means, I would in some way approve of their machine, or their enterprise, according to a written agreement.

I have to assume that another sincere player in the field would be faced with the same frustration of being continuously compromised and insulted by rampant fraud. My intent would not be to promote their business or presume that they might promote mine, as we would still be competitors. However, in principal, an association of ethical makers would serve their common interest. This has been done successfully before in industries where the standards of an association provided the basis for public acceptance where fraud and poor product performance were previously dominant. The bottom line is that when I am asked for this kind of referral now, I have no suggestions that I can trust. It would be far better if I could give a customer the name of a company that at least will not be contradictory to the best interests of both the consumer and the industry.

As for non-contacting electrodes for doing therapy, I have a solution of sorts, but as yet I have not found any method that is equal to direct contact. I know that some devices, presumably like GB4000, have both types. I have not evaluated this unit in the laboratory, but I must assume it has some potential if it is approved for use as a TENS device.

Having both types of application on one machine makes sense if the maker isn’t sure which method actually works. But that gives more credit than is their due, considering what it really takes to make either one perform at its optimal parameters. I assume it is simply a way to justify a higher price.

Dr. Bob Beck was probably one maker I’d have given my approval, if I had had the opportunity. As far as I can tell, everything he did and said in this regard was factual and effective. His creation of very specialized units also was the right idea, in my opinion. However, he has passed away.

I don’t know anything about what the validity is of any device built under his name since that time. If his name has been taken to promote another device, it might be just a joke. On the other hand, it might be an honest Beck device, in which case, it’s success will depend on the skill and knowledge of the new makers. Even the best machines can be useless in the hands of the incompetent.

If I have any real place in the modern history of Royal Rife, I suppose it really doesn’t amount to a great deal. For a long time I figure I was the only honest maker out there. Maybe I still am, but just doing what would be normally expected in any business doesn’t deserve much praise.

~~~~~

I’m sure that the Pentagon release from 1989 on JWLABS.COM has been a cornerstone to uphold the credibility of the technology where nobody else could even begin to defend it scientifically. My successes and my web site information have given the competition more confidence. But that information is intended to give my customers confidence, and at least some of them started out as customers. I might have the record for being the most copied, but adopting my warranty and customer service policies are just common sense. I might be credited with being the first to combine music with Rife Therapy, but music therapy is one of the oldest of all therapies. Still, nothing that merits more than a footnote in any true history of Royal Rife who was the greatest microscopist in history.

It’s a tragedy that Rife’s legacy has been so questionable regarding the therapy, but part of that was Rife’s own doing. He never revealed the entire truth about the therapy, because he felt it was a trade secret. I can’t blame him for that, but 50 years later, it has only served to confuse issues more completely, and given rise to a lot of meaningless argument. If John Crane hadn’t revealed the truth toward the end, we probably wouldn’t have any Rife machine market today at all because history has shown many times that you just can’t get adequate results with a high percentage any way other than direct contact, which he declared was in use during Rife’s tenure.

The potential for reactions to the therapy exists in all new users, and in a few cases even a very feeble device can induce a small reaction. Since the therapy itself is a real thing, it is expected in a very small percentage. If they take this reaction as a success, ignore their failures, eventually they will have a collection of what appears to be successes. It becomes a question of how many users they had to go through to get that many. A device that is only 2 percent effective, as pathetic as it may be, is still able to achieve results in 2 percent of users; and just as we have seen many times with JWLABS model machines, these results often cannot happen with any other type of therapy.

So, it might be possible to get 2 percent results in cases involving a disease where the cure rate is 2 percent. Which would be a 100 percent increase in the overall cure rate. But this sort of thing is only hypothetical, because a 2 percent machine like a Clarke zapper loses it’s apparent therapeutic value entirely once the initial reaction has passed. It’s results rely on an occasional phenomenon. It isn’t able to provide the kind of therapy it takes to continue an actual recovery to the finish.

Of course, anyone can refute what I’m saying, and folks are free to believe whatever they like about the history. I have offered some of the reasons why I don’t entirely believe the history as it has been presented. I’m not offering any major alternative though. I believe that, technologically, there is a logical progression that makes sense; but even that requires some educated guesses to fill in the gaps since both Rife and Crane had, for all practical purposes, refused to reveal the whole truth. This is evidenced by Crane’s self published Electron Therapy Manual.

It was further collaborated by Peter Heller’s archive, which he donated to us shortly before his passing. Peter Heller was Barry Lyne’s partner in an enterprise, the purpose of which was to bring authentic Rife technology to the world. An effort that failed because of basic omissions relative to the therapy. Had they known the truth, they would have spent their limited funds differently. Unfortunately for them, they wasted it trying to repair the microscope. It wasn’t the first time this kind of thing had happened.

I think I understand better now why there are so many heated collection letters from Rife and Crane to clinics, doctors and hospitals, whom they had entrusted to return an independent evaluation of the technology and the promise of prospective distribution.

When I started making machines, I often received this kind of inquiry, and still do. I’m sure they had sent out dozens of instruments to folks they believed to be reputable without payment, probably because of the promise of large wholesale orders if the technology proved out. I did that a few times myself, and it was invariably a mistake. Usually, once they have received the device, that’s the last time they will talk to you.

In one of the few half-way successful speculations I tried with clinics, I had to insist they at least have enough commitment to pay for the initial devices to use in their own experiments. They first got the device approved in their country, then proceeded to conduct the therapy on patients according to the instructions they were given. This clinic was required to document and record all results for every case, and provide them to a government health agency on a regular basis. Hundreds of thousands of people received the therapy, with consistent percentages of successful therapy in 99.1 percent of cases. At the time, it was the most popular clinic in the world. People came from all over the world. When the clinic opened each morning, the lines went all the way around the block twice.

The main reason I did not profit much from all of this, is the simple fact that one machine goes a long way, and I don’t think they ever needed more than 10 or 15 units. They started to run into problems when they tried to expand the operation. I was acutely aware of it when at the same moment, due to repeated delivery errors, it became impossible to send machines to them, which had never been a problem before. Also their payments, which were in the form of direct bank wires, experienced completion or execution problems that delayed them indefinitely. In my opinion, it wasn’t just a coincidence. It was apparently a carefully choreographed sequence of interference that suddenly appeared in our international telephone connections, fax connections, shipping and banking transactions, that had the effect of making business impossible, and creating suspicion that served to undermine my relationship with the owner.

These, and some of the events that followed suggested that this interference could only be coming from some one, or some place, very high up at the transnational level. There is obviously no direct proof of that hypothesis, other than the very destructive nature of a series of highly dubious coincidences.

The clinic continued to experience problems, and it came to an end roughly the time there was an internationally released news story, that characterized them as charlatans by implication. I did not see all of the reports, and was unable to find the original article. It had not been released in the USA, and few if any Americans ever knew about it, nor could they find it if they tried. Parts of it got to me by fax and by snail mail.

The story was about a young boy who had been diagnosed with cancer, and his parents elected to take him to the Rife clinic first, before attempting chemotherapy or radiation, of which the family was terrified. The parents were threatened with loss of custody, and criminal charges of neglect if they did not submit. They were outraged by this, and proceeded to take their child to the clinic anyway, since the well being of their child was their responsibility and their primary concern. Incredibly, a warrant was issued for the arrest of the family, and the parents were charged with kidnapping. Definitely a powerful deterrent for users and practitioners alike. The clinic closed sometime thereafter.

Only one time did I ever have a clinic buy any more than a few machines without any experiments or confirmation of results. One gentleman in particular, bought and distributed hundreds of my machines to his customers without any regard for the safety or efficacy of the therapy. He actually made up his own protocols, having no practical knowledge of his own whatsoever. I believe his coaching lead to at least one fatality. For me that was the last straw, so I immediately let him know that I intended to discontinue his purchases of Model A in the near future.  I offered to give him a turn-key service to make machines under his name, (not mine,) and he enthusiastically agreed.  After we invested in his new production run, he suddenly jumped ship,  claiming that family members didn’t get the results they wanted. It’s been our practice since day one to provide customer support to all  JWLABS model users. We were in touch with enough of his customers that we knew what their results were.  And they were not as he claimed.  He did not, in fact,  know the results of his own customers, as he was not providing follow-up. True to form, he attempted to skip out on his bill. Tens of thousands of dollars worth of machines that had already been delivered. Thanks to that guy, I now only offer wholesale prices on a turn-key basis, under their own label, so they will be more responsible with their claims and their actions.

My economics are a lot different from those of Rife and Crane. Losses of this sort are irritating to me, not devastating. However, Rife was shipping out a lot of really costly, as well as labor intensive equipment to clinics without advance payment and no signed agreement. This had to be a major factor that held back Rife and Crane, along with the technology itself. Small businesses have a hard time recovering when they have no money and no inventory. The options they have are quite limited and most involve further compromise like accepting investors or bank funding.

I guess the biggest problem I have with the published history as it regards Rife Therapy is the intensity and seemingly uncalled for vitriol. I fail to see any distinguishing theory that explains this. From my perspective, most of the details are irrelevant except perhaps to a historian. My interest is only in the therapy.

I’d hate to think the only motivating point that these folks are trying to put over is the misguided belief that the therapy was done with the Ray Tube attachment;  because if it is, that claim immediately falls apart under any objective scientific scrutiny.

Radio is a most inefficient and potentially harmful way to deliver frequency to the body.

For me, as it is for many people who have a general grasp of household physics, the therapeutic value of the Ray Tube is effectively dead on arrival. The question we raise about the desirability and expected effects of things like this may have given pause for educated people 50 years ago, and thereby become a quagmire.  Not so anymore. Today this issue goes without saying, because today it is obvious. Average folks with no technical background, however, even today are far more easily mislead.

It would have been inappropriate for me to decline a thorough examination of the Ray Tube before deciding not to build it at all. And I did so, mostly to assure myself that it would be the right call.  Because to make that decision responsibly, it had to be without a shadow of a doubt. One of the things that helped me to get past that problem was the Pentagon Release. It would have been equally inappropriate for me to decline a thorough examination of any relevant contemporary science or technology. The Electro Conformational Coupling document provides the model in biochemistry to explain most of the effects in terms of more modern science, most of which did not exist in Rife’s time. Obviously, none of it calls for a Ray Tube; but it does call for energies identical to what we use today in JWLABS model machines.

~~~~~

How responsible would it be to make a device that relies on technology from 70 years past? Perhaps if I were only building guitars, or restoring antiques, it would be acceptable; but in an electronic device that might be critical to the well being of a great many people, it would almost be a war crime.

Although I started out with Rife technology, and I incorporated it into my designs, my machines are based on concepts that come from a spectrum of sources which I was able to blend together. The contributions I collected from Royal Rife’s work are certainly an integral part of the whole but they are not the theories we use to understand, to control or to manage the therapy.

Some folks are caught up in the idea that only the old fashioned Rife hardware, used the way Rife said to use it, is the only effective way. This assertion is the kind of thing that will make a modern Electronics Engineer wonder what you’ve been smoking. An EE is not a physicist or a medical doctor, and as such they can’t presume to make judgment calls in those areas of the technology, but at least they know which way is up.

But in a strange way, this preposterous notion was true in a sense. Converting antique vacuum tube technology to modern components was more difficult than it appeared. Many of those who tried to do it failed, not realizing that some of the components of the old technology provided characteristics that had to be equaled or at least simulated. No one had anything to guide them to the correct answers, so if they discovered the right combination at all it was by luck or by trial and error. Mostly error.

For this reason, the myth that only the old style vacuum tube technology was any good, persisted for decades. It was never completely true from a technical point of view. There was never a point where new technology couldn’t replace the old. Engineering-wise, it was simple if you knew which components were critical and which ones didn’t matter. Without that information, it was impossible.

JWLABS Model B27 version 4
Our final vacuum tube Rife machine

The way I solved the problem was to not even try. I just went ahead and built vacuum tube devices, because that’s what most people thought they wanted anyway. A vacuum tube is not the same thing as a ray tube, by the way. Vacuum tubes were replaced by transistors beginning in the 50’s. It was a very common component in virtually all electronics until it was replaced by the silicon chip.  (See evolution of JWLABS vacuum tube devices HERE.)

The so- called Ray Tube was an attachment to the Frequency Instrument itself. It was made by filling an old X-Ray tube with a gas like argon, and putting an electric charge into it. It was usually hooked up to a contraption consisting of an amplifier, a radio transmitter, and a frequency generator. The radio energy it produced radiated from it in all directions. There was no ray in the true sense. It was also called a plasma tube, but the only plasma was in the tube itself as the gas heated to the point where it would illuminate.

I was never completely convinced that the tube itself served any purpose that a straight transmitter couldn’t do just as well. I didn’t actually build and test that theory, but I always felt it was suspicious that he used an X-Ray tube, and it made a pretty light. I just always saw that as being just a little too cute to be something real. This was the time American doctors began to have X-Ray cameras in the office, so obviously they would recognize that the Ray Tube had some similarities. Presumably, doctors were more comfortable with it for that reason. The fact that it lit up like a neon sign must have made it seem more convincing to a patient. To me it seemed like an unnecessary contrivance.

In the last ten years, Model A-3 has become the most cost-effective of all Rife machines. Surpassing even Model B  in efficacy at less than one tenth the price, Model A is nearly the perfect instrument. No more cryptic programs, no more searching for the right frequencies, everything is done for you by an expert. Recorded sessions are not simple programs. They are live sessions hand-tuned (within a billionth of a hertz), recorded directly from the special Model B recording output. So they are far richer, far more complete, and we have a full library of sessions for your selection.  We have developed other innovations in the last two years as well.

Learn more at

www.rifemachine.com

www.jwlivewires.com

JWLABS’ Model A-3 solid-state Rife machine

Click image to view start-up video.

The post The Royal Rife Story: A Confused History appeared first on Rife Machine.

The design of JWLABS Rife therapy is intended to appeal to users not interested in learning any more about technology than they require. It’s important that Rife technology, with its complex layers of effects, be made understandable safe, and easy to use.  Only then, is it practical for the end user.

In general, JWLABS customers have very specific, or very critical needs and very little time or money left to deal with them.  This means simpler, more cost effective, more automated Rife machines are the primary issues of the apparent public demand.

JWLABS recorded frequency sessions are a form of music.  They are hand tuned and played with skill.  Much like any musical instrument is played and the music recorded.  The needs of the user are anticipated in the contents of the recording, or score, and the full effects of the therapy can be realized with little or no education required.  Safety is the primary concern.

The Model A Rife machine cannot harm human cells, does not cause disease, and has no direct side effects.  However, it is extremely potent.  Over-use of the Model A may result in an increase in symptoms.  This can be a real hazard, especially for a new user with a long history of chronic disease.

This is not the famous “Herxheimer effect”.  It is the user’s physical reaction to massive immune stimulus and sudden detoxification of the system.  There is no danger, provided the user knows to stop the therapy and allow the effects to pass before they begin again.

Any music, audio frequency number or sequence can be input to Model A.  This is the Tactio® feature.

Sessions created on JWLABS Model B-27, are recorded by channels, A,B,C,D.  

On our advanced recordings, the frequency range of each channel is as follows:

1. 3 to 33 Hz
2. 33 to 333
3. 333 to 3300
4. 3300 to 10k

These channels always correspond to the four tracks of each session title, except for the General Alignment.

A = Track 1

B = Track 2

C = Track 3

D = Track 4

The frequency range for virus, bacteria and most fungi are always on Track 3, except for the General Alignment.

Major parasites, ATP synthesis, low blood pressure, general detoxification, etc. are always on Track 1.

Immune stimulation, cleansing of the blood, and further detoxing and major parasites are always on Track 2.

High Blood pressure, and deep tissue therapy are always on Track 4, (except for the General Alignment.)

Each title is tuned throughout these ranges, with specific sets of exact frequencies as used traditionally, and as demonstrated by previous users.

The General Alignment splits track 3 into two parts:  bacteria, Track 3, and virus Track 4.  But this is only true in the General Alignment recording.  Which therefore has 5 tracks instead of the regular 4.  The purpose of this is to make the General Alignment a bit less aggressive in its design, for the safety and comfort of new users.

JWLABS’ basic strategy has been to attempt to minimize all reactions, in an effort to orchestrate a smooth and event-free transition to a better state of health.

The General Alignment (GA) is designed to find a level of therapy that is safe for everyone, regardless of their state of health.  Our tradition is to establish a regular maintenance routine for the user, via the GA, before attempting more aggressive or more specific treatments.  A process that we find often will take longer for folks who are ill.

We suggest using Track 2 of the GA, (10 minutes, hands only, 5 days on 2 days off ), for the first week.  Not moving beyond this until it is obvious that no further reaction is expected.  Adding Track 3 to the daily routine, again until there are no reactions, establishes a base line or maintenance level.  More aggressive systemic and localized sessions are added to this basic maintenance as appropriate.

So, a typical routine the first week looks like this: Track 2 of General Alignment (GA), 5 days on, 2 days off.

The second week: GA, Track 2 and 3 for 10 minutes each, 5 days on, 2 days off.

This, presuming that there is no significant reaction either in the pH swing from before to after the session or in term of how the Model A user feels.

The energy Model A delivers is a volts/amps electrical current balanced in a way that is a stimulus to the body, but devastating to virtually all known parasites from flukes to virus.

It’s an energy that you can feel, and it is effective in this way at any of the frequencies Model A delivers in normal use.  All the frequencies are effective. Specific frequencies are more effective.

Model A automates both of these factors to accommodate a smooth and complete therapy with no other planning than to select a Title and a Track.

This leaves the user free to direct their attention to the process of the therapy itself.  Such as the physiology, the path of the energy, method and timing etc.

Recorded sessions allow the user to more easily repeat sessions consistently.  And take advantage of our masterful tuning.   Thus the user, whether private or professional, can expect a certain predictability about the effects of their Rife therapy sessions.  A perfect solution for those who don’t need to know how the engine under the hood of their car works to arrive safely at your destination!

Read about what our users love about JWLABS Rife therapy in a convenient package.

http://rifemachine.com/rife-technology-2/success-stories-2/

Learn more about JWLABS Rife therapy at www.jwlabs.com

Follow us on Facebook at www.facebook.com/jwlabs

SUBSCRIBE to our blog at the top right of this page!

The post The Basics of JWLABS Rife Therapy appeared first on Rife Machine.

How does one discern the truth about Rife technology?  And how do we make a sound decision regarding choosing a Rife machine?  We speak to people daily who are grappling with this.

Increasingly, the consumer is challenged to sort out fact from fiction, truth from hyperbole.   We are faced with excruciating choices with respect to our finances, our politics, and our health care.  Our livelihood, and sometimes our very well being, depend on our ability to make sound decisions.  In this age of too much information, misinformation, and deliberate disinformation, we are awash in confusion and dilemma.

To make matters worse, many are already challenged emotionally and financially by the time they are considering owning a Rife machine, so the decision making process is complicated further.

In a previous blog, we called attention to devices in the marketplace which are of dubious value, and are represented by people who are somewhat in the shadows.  By this, we mean that there is no owner of the company identified, no historical background provided (except reference to the story of Royal Rife) which would lend credence to their claims or otherwise indicate that they have expertise with the technology. You might call them “copycats”.  Taking advantage of the little that people know about Rife technology; and, worse, what people don’t know.  (See http://rifemachine.com/discussions-with-john-wright/rife-follies-saga-instant-expert/ )

Isn’t this always the way?  Isn’t this what we are faced with, really, when it comes down to making decisions which have consequences? We start out thinking that we know something about the subject, only to learn that we are truly uninformed.  If we have the steadfastness and the stamina, we persevere in the process and collect information which seems to buttress our confidence.  Only to learn along the way that much of what we have digested is inaccurate, misleading, or downright untrue.

We have reason to believe that there are people, even companies, which have been carefully placed with the express purpose of creating this confusion.

The field of Rife technology is an unregulated industry.  It’s like the Wild West.  We are mavericks, in that what we provide flies in the face of most conventional thinking.  Though Royal Rife demonstrated nearly three generations ago his frequency theory, the most well-known device to be FDA approved to date remains the modest TENS machine.  No accident that it was approved within about a year of Rife’s passing, and by a company based very near to where Rife had his laboratory.

The TENS machine, you may know, is approved for pain relief.  And yes, you will find folks who have gone through the approval process with their “Rife machines”.  They are approved for pain relief only.  They are sold to the public with a wink and a nod as one of the few “approved Rife machines.”

Hey, whatever works!

This does serve a larger purpose, in that it gets into the hands of people at least something that can provide some measure of benefit to the user.  Even the most feeble device will have some beneficial effect.  This, we say with confidence, because we understand the nature of the technology.

In 1989, the DOD shared with us documentation which not only confirmed Rife’s effects, it advanced our understanding what is happening in the body as a result of adding current at frequency.  It is much more than Royal Rife knew.  And what this evidence speaks to is the effect of current at frequency, not radio frequencies.  We urge you to examine this document.  http://jwlabs.com/rife-technology-2/skeptical/pentagon/  It’s very technical, but you will see at a glance that much more is happening than the electrocution of pathogens which Royal Rife demonstrated.  For simpler understanding, view John Wright discussing the basic effects of Rife therapy.   http://www.rifemachine.com/rife-advancement/model-rife-machine-basic-effects/ 

John Wright began producing Rife machines in 1987.

It’s not uncommon for us to hear from folks who already have machines or have previously used machines and are especially taken with the allure of Rife technology.  They understand that something important is afoot. For some, it’s purely an academic interest.  An extension of their innate understanding that all things are of frequency. We are, after all, electrical beings.

For others, it’s deeply personal.  This, because they have experienced remarkable results from using some form of Rife machine, and they want the world to know.  They become missionary-like in their zeal to spread the word, and they sometimes position themselves as more knowledgeable than they really are.  This is another form of what we call “Rife follies”.

These self-proclaimed experts can lead you down a trail of confused pseudo science.  And it’s easy for the uninitiated to get lost in their enthusiasm.  Are they dangerous?  Perhaps.  Might they mislead you?  Absolutely!

We spoke recently to one such young gentleman who is establishing himself as an “authority” on Rife technology.  He announced that he had daily videos on You Tube and that he had established a Facebook page sharing his experience with a Rife machine.  This person was dealing with a pretty serious health condition; and he insisted that, after just three months, he knew enough about Rife technology to coach others.  He even bragged that he was making a living at this!

Quietly, and with raised eyebrow, we listened to his storm of assertions and inquiries about the technology.  His questions were confused, and it became clear that he was not listening as we patiently attempted to make certain distinctions which were meant to deepen his understanding.

When questioned about how he was making a living, he proudly stated that he was being paid commissions for referring folks to certain companies.  Each referral which converted to a sale resulted in fees from $500 to $1000, depending on the company.  On the face of it, this may seem fair enough.

He’s funneling business to certain companies, resulting in new business and he is being rewarded.  That’s how the world works, right? That’s commerce.

In the world we live in today, perhaps this is uneventful and fairly benign.  But in the world in which JWLABS operates, it is a grievous insult to those who have pioneered Rife technology.  Those who have sweated out the details, designed and re-designed their instruments.  Researched and experimented, building from the ground up.  Slow and steady.  With hours and years invested in listening to the feedback from users of their devices and incorporating the nuances into the advancement of the technology .  And especially, those with a heartfelt commitment to the success of their customers.

This 20 year old neophyte asked us no less than three times if we would pay him a fee in return for referrals.  Three times, we declined. We ended the conversation, wishing him well.  But with an uneasy feeling that there may be harm done to those whom he was coaching.  Little did we know that the payback would come swiftly and that it would be directed at us.

Within minutes, he was posting on his Facebook page about JWLABS.  He took some things we had discussed completely out of context, demonstrating not only that he did not understand what we were explaining about Rife technology, but that he had no desire to.  He used his out-o- context statements to bash us.  His attempts to discredit us were not based on any facts, but we knew the unspoken: We had refused to pay him referral fees.  He could not make money with us.

True colors.  Passion?  Enthusiasm?  Or hidden agenda?  (He did not disclose on his page that he was accepting referral fees, so the innocent consumer could factor that in to what they “learned” from him.)

This is but one such story about a “self-proclaimed expert”.  We could tell you others.  They come in all forms, some wearing white coats (as in the case of a head of a world renown clinic who peddled Rife machines, but had no interest in being trained or coaching his patients properly), others who are self-described entrepreneurs.

We felt that this story was important to tell because it’s important to know to whom you are speaking.  Who is the author of what you are reading?  To whom are you granting authority?  And in what domain?

A larger question is who do you trust?  In this world of social media, we call “friends” those we have never met.  We relate stories which are unverified.  We hold as truth what we hear in the “news”.

It IS the Wild West!  And this is true on so many fronts.  We urge you to take your time.  Do your homework.  Learn which questions are the right ones to be asking.  We must learn to be discerning, for there is temptation in all directions to be misled.

When choosing a Rife machine, ask yourself:

To whom am I speaking?  What is their history in the industry?  Does their material make sense to you?

Is their equipment and their technology straightforward and not over-complicated?  Do they stand behind their equipment, and for how long?

Is there someone there who will care when you have questions, become confused, or otherwise need guidance?

We invite you to call to discuss your questions and concerns.

Stay tuned for updates as we prepare to launch our next generation of Model A Rife machines.

The post Rife Technology – Re-visiting “Rife Follies” appeared first on Rife Machine.